How to Install twrp Recovery Root Wiko Slide 2

Root twrp Wiko Slide 2:

twrp Recovery now Released For the Wiko Slide 2 and Finally We have A Solution to Root it. So that today we will talk about this topic. In the topic We are going to Share a Complete Guide to Root Wiko Slide 2 by using the SuperSU and twrp Recovery.

Many peoples use Wiko Slide 2 but few people know about rooting the phone . So the article For that Whom does Not Know How to Root. Root is Not Necessary for all Peoples but it Require to achieve Some advance features of the Device .

by Rooting the Phone You can improve Your phone’s performance even better. but it also Dangerous for  Newby. You can get the full information about ” Android root ” from Here. We can root our phone in two ways First one using the Computer and other one Without using the Computer. but The Wiko Slide 2 is Not Rootable without a Computer So You Must have a PC to Root it. Let’s get Start The process.

Note-

1. This Guide is Work only on Listed Device. So please Don’t try it on any other Phone.
2. Flashing The ROM Will Erase all your Data, So Must create a backup of your Personal data before Flashing,
3. Please Do carefully, We are not Responsible for any damage, bootloop, or dead SD card’s.
4. Ensure that your Device at-least 50% charge During Flashing Process,to Stop the Accidentally Shut Down.
5. Follow all steps correctly otherwise it Will cause bootloop.

Features of TWRP Recovery:

  • You can flash Custom ROM on
  • You can flash modding zip files to customize your phone
  • Easy to flash and use Xposed Modules using TWRP
  • Easy to Root and Unroot using TWRP Recovery flashable zip SuperSU
  • You can install Magisk on
  • You can always take FULL NANDROID Backup in case of any modding or flashing.
  • Easy access to restore the Nandroid Backup.
  • You can flash the image file using TWRP Recovery
  • Easy to remove all bloatware using TWRP Recovery
  • To underclock and overclock.
  • You can clean Wipe, Cache, and Data.
Must Require:

1. backup NVRAM
2. backup Your Personal data
3. Create a nandroid backup

Download-

File Name Download
twrp Wiko Slide 2 Download
SuperSu/ Magisk Download
adb fastboot Driver Download
No-verity-opt-Encrypt Download
adb fastboot tools Download

Pre-Requirement’s:

  1. unlocked bootloader [use below Guide]
  2. PC and usb
  3. adb tools Setup, Download and extract in a folder.
  4. Move recovery File to adb folder [must rename it [recovery.img]
  5. Install adb fastboot Driver
  6. Enable usb debugging and oem unlock

How to Install twrp Recovery on Wiko Slide 2-

Step 1. Download twrp Recovery From above and extract in adb Folder [also Download and  extract From above]

Step 2. Download & Install adb fastboot Driver On Your PC

Step 3. then follow Bellow Instructions,

Step 4. Go to Setting>about Phone>type 7 time Build number > Back>Developer Option and Enable Device Debugging and Oem Unlock.

Step 5. Now Install Correct adb and fastboot Driver on Your PC[Skip if Installed], Go to adb folder[Extracted in above step] Connect Device to PC using usb open CMD Here and type command .

adb reboot bootloader

Step 6. Your Device Booted in Fastboot Mod To check Device connectivity type

fastboot devices

Step 7. Unlock bootloader:

fastboot oem unlock
fastboot flashing unlock

Step 8. Rename twrp to recovery.img and Move it in adb Folder(if Done skip it),

Flash twrp on Wiko Slide 2 using below Code:

fastboot flash recovery recovery.img

Reboot Wiko Slide 2 to twrp using This Code:

fastboot boot recovery.img

Step 9. Recovery is Now Flashed [installed] Your Phone also booted in twrp Make a System Reboot. or Flash zip if you Want.
Step 10. Done

How to Root Wiko Slide 2-

Step 1. Download Magisk/superSu From above and Save it to Device storage [internatl/ external].
Step 2. Switch of phone and Press power and volume up button to boot Device into twrp [Installed in above Step] or use code
adb reboot recovery
Step 3. In the twrp Go to backup tab and Create a nandroid backup. Don’t forgot to include NVRAM or imei aka EFS.
Step 4. Go to wipe tab and Do a factory Reset.only Do a factory Reset Do’t include other partition’s.
Step 5. Go to Install tab and Locate Download SuperSu.zip and confirm Install, wait For Success Done.
Step 6: again to Install tab locate No verity Disabler.zip and Confirm Install. Done Reboot system Now.