HTC Wildfire E2 Firmware Flash File MT6762 10.0

Download Stock Firmware (Stock ROM) for HTC Wildfire E2:

Official Stock Firmware Now available for the HTC Wildfire E2 & You can download it from below. by using this firmware you can solve all software Issues with in your HTC Wildfire E2 such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.

HTC Wildfire E2 Run on Android 10 and it is Powered by Mediatek MT6762 Processor. it is a dual SIM smartphone Support nano SIM card, connectivity features Include hotspot, GPS, WIFI & bluetooth. The device come with 3/4GB of RAM and 32/64GB of Storage that can be expandable via SD card.

Pre-Requirement’s

  • backup NVRAM using this guide
  • make a complete backup of your device
  • charge the device at least 50% to prevent accidental shut down during the process

Note:

  • disable auth by following this Guide Win / Linux (optional if any error)
  • The firmware is for Repairing purpose only, You have to manage risk accordingly
  • downgrade via flash tools work’s on Most of devices but I don’t know about this device
  • a customized MTK DA file is Require to bypass ‘Download agent Authentication‘ you can Search our site for custom DA file

Firmware Information:

Device Name: HTC Wildfire E2
Type: Full ROM
Size: up to 3.5GB
SoC: Mediatek MT6762
Os: Android 10
Password: 1unlocker.ru
Gapps: Included
Root access: Not
Firmware Version:
Wildfire_E2__10__HTC_WILDFIRE_E2_RU_V006_20200813__QP1A.190711.020__Wildfire_E2_RU

Download Links:

How to Install Stock Firmware on HTC Wildfire E2:

  • Download & Extract firmware on your computer
  • Install Mediatek VCOM driver on Your computer
  • Download & Extract smartphone flash tools on your computer
  • from the flash tool folder Run flash_tool.exe

  • Go to Download tab Click Scatter and load scatter file from ROM folder

  • select Download only. Click Download
  • connect Your switched off Phone to computer by using usb cable (USB +Volume up and down key) (make sure all driver are installed, if no usb VCOM device then you have to do test point)

  • flashing Process started. once done, unplug device & switch it ON
Read also:

have any issue, Let me know via comment


LEAVE A REPLY

Please enter your comment!
Please enter your name here

16 − five =