The official stock firmware for RedMagic 10s Pro NX789S is a reliable solution for restoring your phone to its factory condition. Whether your device is stuck in a boot loop, facing software bugs, FRP lock, or slow performance, flashing the official firmware can fix these issues. This ROM is provided directly by the device manufacturer, ensuring maximum compatibility, performance, and security.
Important Notes:
- Backup all your data from the RedMagic 10s Pro NX789S before flashing.
- Incorrect flashing can brick your device — proceed carefully.
- Ensure the firmware matches your exact RedMagic 10s Pro NX789S model.
- Flashing the wrong file can result in boot failure or hardware issues.
Download Firmware
- GEN_CN_NX789s_V10.5.9MR_SD_Card_OTA
- QFIL/QPST Tool: Download
- QDLoader Driver: Download
- Contact Me for help with unbrick, FRP bypass, reset, region unlock & rooting
Benefits of Installing Stock ROM:
- Unbrick a dead or stuck RedMagic 10s Pro NX789S
- Remove FRP (Google Account) lock
- Fix boot loops or stuck-on-logo problems
- Restore stock software if rooted or modified
- Remove screen lock, pattern, or password
How to Flash Firmware on RedMagic 10s Pro NX789S
- Install the RedMagic 10s Pro NX789S USB driver on your computer.
- Download and extract the RedMagic 10s Pro NX789S firmware package.
- Install the QPST or QFIL flashing tool.
- Launch QFIL and go to “Firehose Configuration”.
- Select your RedMagic 10s Pro NX789S’s storage type (eMMC or UFS).
- Enable “Reset After Download” option.
- Browse and select the programmer firehose file from the firmware directory.
- Load
rawprogram*.xmlandpatch*.xmlfiles. - Connect your RedMagic 10s Pro NX789S to the PC in emergency mode mode (9008).
- Click the Download button to begin flashing.
- Wait for the process to complete. The phone will reboot automatically.
How to Install Recovery ROM via ADB
- Move ota in device storage
- Go to software update, you may see ota update, click to install (downgrade not supported)