Download official Firmware (Stock ROM) for FiGi NOTE 1C:
Official Stock Firmware Now available for the FiGi NOTE 1C & You can download it from below. by using this firmware you can solve all software Issues with in your FiGi NOTE 1C such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
FiGi NOTE 1C Run on Android 11 and it is Powered by Mediatek MT6771 Processor. it is a dual SIM smartphone support nano SIM card, connectivity features Include hotspot, GPS, WIFI and bluetooth. the device come with 4GB of RAM and 32GB storage that can be expandable via SD card.
Pre-Requirement’s
- backup NVRAM using this guide
- make a complete backup of your device
- charge the device at least 50% to prevent accidental shut down during the process
Note:
- (optional) disable auth by following this Guide
- The firmware is for Repairing purpose only, You have to manage risk accordingly
Firmware Information: |
|
|---|---|
| Device Name | FiGi NOTE 1C |
| ROM Type | Full ROM |
| SoC | Mediatek MT6771 |
| OS | Android 11 |
| Password | Null |
| Gapps | Included |
| Root Access | No |
| Region | GLO |
| Firmware Version | Android11.0-25.04.2022 |
Download Links:
How to Install Stock Firmware on FiGi NOTE 1C:
- Download & Extract firmware on your computer
- Install Mediatek VCOM driver on Your computer
- Download & Extract smartphone flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and load scatter file from ROM folder
- select ‘Download only’
- Click ‘Download’
- connect Your switched off Phone to computer by using usb cable (USB +Volume up and down key) (make sure all driver are installed, if no usb VCOM device then you have to do test point)
- flashing Process started. once done, unplug device & switch it ON
Read also:
have any issue, Let me know via comment