IMEI Number or International Mobile Equipment Identity is a Number to identify a Mobile Phone. all GSM network use IMEI Number to validate the device. if you have Loss IMEI Number on Your Chuwi Hipad Pro due to any software issue then You can Repair it by following the below Instructions.
Chuwi Hipad Pro Run on Android 11 & it is Powered by QCOM SD662 Processor. connectivity options Include GPS hotspot WIFI etc. the device comes with 8GB of RAM & 128GB of Internal storage that can be expandable Via SD cards.
Requirement:
- QPST Here
- QCN Rebuilder
- QCN Chuwi Hipad Pro: Download
- Patience.
Steps to Repair IMEI Number on Chuwi Hipad Pro:
- Download Everything From above. Now Run QCN Rebuilder and Select Downloaded QCN File
- Replace IMEI Number With the Original IMEI Number ( don’t change otherwise Your Phone will Not accept it). then click Rebuild
- Now Enable usb debugging and connect Phone to PC
- Send the below code via CMD
Reset EFS Partition
adb reboot bootloader fastboot erase modemst1 fastboot erase modemst2 fastboot erase fsg fastboot erase fsc
- flash modemst1 modemst2 fsg & fsc (available in firmware) via fastboot
fastboot flash modemst1 modemst1.img fastboot flash modemst2 modemst2.img fastboot flash fsg fsg.img fastboot flash fsc fsc.img
- Enable Diag Port (require root):
adb shell su setprop sys.usb.config rndis,diag,adb
- Run QPST. Go to Restore tab and Select the Rebuilded QCN file & Click restore
- done
Related: