twrp Root Huawei P10 Plus-
Root twrp Recovery for Huawei P10 Plus is Here, in the article you Will Learn How to Install twrp Recovery and Root Huawei P10 Plus. Rooting is the way to obtain Supersu Right’s on Android Devices, that means after Rooting the Phone You can unlock All features of the Device and you have Full Permission to Play with it. means you can Install custom ROM, Install Custom Mod’s and tweak your phone using various tricks. Rooting also Best way to Save battery because after Rooting you can Disable all Apps In Single Click and also you have Right to Remove Pre-Installed system app so you can Easily Uninstall Non Require System apps. follow below Guide to Install twrp Recovery and Root Huawei P10 Plus.
1. This Guide is Work on Listed Phone only
2. Flashing The ROM will erase all your Data with official Rom, So create a backup of your personal data before Flashing, if possible.
3. Please Do carefully, We are not Responsible for any damage, bootloop, or dead SD card’s.
4. Ensure that your Device atleast 50% charge During Flashing Process,to Stop the Accidentally Switch off.
5. Follow all steps correctly otherwise it cause bootloop.
6. Must backup NVRAM using this Guide before Doing anything.
Require tools and Files-
|twrp 3.2 Huawei P10 Plus||Download|
|adb fastboot Driver||Download|
|twrp /root Dev only||Download|
How to Install twrp Recovery on Huawei P10 Plus-
Step1. we need to unlock bootloader so Go Here and unlock bootloader..
Step2. Download twrp Recovery for Your Device From above and extract[if zip or rar] inside a folder
Step 3. Download adb folder From above and Fastboot driver Installer From above
Step 4. then follow Bellow Instructions, BE Remember Bootloader Must Unlcok
Step5. Go to Setting>about Phone>type 7 time Build number > Back>Developer Option and Enable Device Debugging And Oem Unlock.
Step 6. Now Install Correct adb and fastboot Driver on Your pc, Go to adb folder connect device into pc open Cmd Here and type command >
adb reboot bootloader
Step7. Your Device Booted in Fastboot Mod To check Device connectivity type
Step8. Rename twrp to “recovery.img” and put in adb Folder, To flash twrp Type-
fastboot flash recovery recovery.img
Step9. Recovery is Now Flashed [installed] make a System Reboot By this Command
Step 10. Done
Note- if we provide toolkit then Run toolkit exe and follow on Screen instructions.