Xiaomi Redmi Pad (yunluo) Flash File Stock ROM

Download Stock Firmware Flash File For Xiaomi Redmi Pad:

Official stock firmware Now available for Xiaomi Redmi Pad and you can download it from below. by using this firmware you can solve all software Issues on your Xiaomi Redmi Pad such as hang on Logo, frp lock, Fastboot Mode, display Blank or White after flash, dead recovery, dead after flash etc.

Xiaomi Redmi Pad Run on Android 12 & it is Powered by Mediatek helio G99 Processor. connectivity Option’s Include GPS WIFI, bluetooth, Nearby share etc, sensor Include Gyro, Proximity Gravity etc. the device come with 3GB of RAM and 64GB of storage that can be expandable via SD card.

Note:

  • Must Make a backup before process
  • it will erase all your data Including Internal storage
Firmware Information:
Device Name Xiaomi Redmi Pad
ROM Type Full ROM
SoC Mediatek
OS Android 12
Password Null
Root Access No
Region check below list
Firmware Version V13.1.4.0.SLYMIXM

Download Links:

EEA:

Russia:

TAIWAN:

China:

Flash Tools:

USB Driver:

How to Flash Xiaomi Redmi Pad Via SP Flash tool:

  • unpack downloaded Firmware using 7zip
  • Now You have scatter firmware
  • Install Mediatek Vcom driver on Your computer
  • disable SLA Authentication by following this Guide (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
  • Download & Extract smartphone flash tools on your computer
  • from the flash tool folder Run flash_tool.exe

  • set connection like below image (option/connection)

  • Go to Download tab Click Scatter and Load Scatter File from ROM folder
  • Repeat Process and load DA and Auth file too

  • from drop down Select ‘Download only
  • Click ‘Download’

  • turn Phone OFF, Now together Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key (make sure your phone stable in device manager)
  • You will see a Yellow flashing bar with flashing Process. once done, unplug device and switch it ON

Method 2:

  • Install MTK & usbdk driver on your pc
  • Run rom2box Go to Mediatek/Firmware flasher & open dedicated GUI
  • turn Phone OFF, Now together Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key
  • On ROM2box Go to Partition Flasher, load all files one by one From extracted firmware
  • Now Click Flash button, wait until success, disconnect device, reconnect, once charging started, disconnect & Restart..
Read also: