Download Stock Firmware Flash File For Xiaomi Redmi Note 9:
Official tested Flash File Now available for Xiaomi Redmi Note 9 and You can Download it From below. The Firmware will help you to Restore Your bricked device.
Xiaomi Redmi Note 9 Run on android 10 & it is Powered by Mediatek helio G85 Processor. it is a Dual SIM Smartphone Support Nano GSM SIM Cards, connectivity Option’s Include 3G 4G, GPS, Wi Fi, Bluetooth etc, Sensor include Goryo Proximity Gravity etc.
The device come with 3/4GB of RAM and 64/128GB Storage can be Expandable via SD card. in camera Department the Device Come with 48+8+2+2MP Rear Camera With 13MP Front Shooter.
- Must Create a backup of Your Personal data.
- it will Erase all your Data Include Personal information.
- Make Sure Your Phone Have at least 40-50% Charge to Prevent accidental Shut Down.
Device Name: Xiaomi Redmi Note 9
Type: Full ROM
ROM Size: up to 3GB
SoC: Mediatek helio G85
Os: Android 11
Root access: Not
Firmware version: V18.104.22.168.RJOINXM
full firmware to Reinstall board software (only for dead and bootloop devices)
- V22.214.171.124.RJOINXM India Stable: Download
- V126.96.36.199.QJOCNXM China Stable: Download
- V188.8.131.52.RJORUXM Russia Stable: Download
- V184.108.40.206.QJOTRXM Turkey Stable: Download
- V220.127.116.11.RJOTWXM | 11.0 Taiwan Stable: Download
- V18.104.22.168.RJOIDXM Indonesia Stable: Download
- MI Flash: Download
- Authorized MI Account Require
- Mediatek USB Driver: Download
- contact me Here for Mi Flash Auth, unbrick, Region Change & root (paid)
How to Install Stock Firmware on Xiaomi Redmi Note 9:
- Download and Install usb Driver On PC
- Download & Extract MI Flash
- Now Run MI Flash Click Refresh
- Select Extracted Fastboot ROM folder
- Reboot Phone to Bootloader and Connect To PC
- Click Start and wait until success.
Flashing Via SP Flash tool:
- Extract Downloaded Official Stock ROM..
- Install Mediatek Vcom Driver on Your computer.
- Download & Extract SP Flash tools, Run SP Flash tool.exe
- Go to Download tab click Download agent and chose downloaded MTK_AllInOne_DA_mt6785.bin
- Click Scatter and Load Scatter File from ROM Folder
- Select Download Only. if you have select “Format all + Download” then it will wipe IMEI Number tool so be careful.
- Click Download & Connect Your Switched off Phone.
- You can see Flashing Process on Screen. once done, unplug & switch it on