Download official Firmware/Flash File for Tecno SA7S:
official stock Firmware/ Flash File Now available for the Tecno SA7S & You can download it from below. The firmware come in PAC format which is flashable with spreadtrum upgrade tool or upgrade research/download tool. This firmware will solve all software Issues on your Tecno SA7S such as hang on Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
Tecno SA7S Run on Android 8.1 & it is Powered by Spreadtrum SC7731E Processor. it is a dual SIM smartphone support Nano SIM card, connectivity Option’s Include GPS, Wi-Fi, hotspot, bluetooth etc. sensor Include Goryo Proximity Gravity etc.
Why We Need Stock Firmware?
- to downgrade a Phone
- to upgrade a Phone
- fix some serious issue in phone
- remove FRP Pattern and Pin lock
- fix bootloop and software issue on Phone
- completely Re-Installation of board software
Pre-Requirement’s
- first make a complete backup of your Personal data (if possible)
- charge the device at least 50% to prevent accidental shut down during the process
Must Require:
Firmware Information:
Device Name: Tecno SA7S
Type: Full ROM
ROM Size: up to 1.1GB
SoC: Spreadtrum SC7731E
Os: Android 8.1
Password: Null
Gapps: Included
Root access: Not
Firmware Version: SA7S-SA331-8.1-ZA-Voda-V010-20181122__OPM2.171019.01
Download Links:
| File Name | Version | Downloads |
| SPD Driver | R4.20.0201 | Download |
| SPD tools | R24 | Download |
| Firmware/ Flash File | check above | Download |
How to Install Stock Firmware on Tecno SA7S:
-
- Download and Install SPD Driver from above
- Download and Extract ROM File and Flash tools From above
- Run Flash tools and Click Load Package.
- Now Select Pac file from the downloaded ROM folder
- Click Download and connect Your switched off Phone.
- done/
Check other articles-