Download Stock Firmware/Flash File Tecno Pouvoir 3 Air:
Download Official Stock Firmware Flash File For Tecno Pouvoir 3 Air If you own Tecno Pouvoir 3 Air Smartphone and You want to Download the Stock ROM /Flash File/For it then You are on a Correct Place, You have to do this by following the Below Guide.
In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Tecno Pouvoir 3 Air lag or has an issue, then flash the Stock Firmware From the list below and save from situation. Stock Firmware doesn’t void a warranty on Your Tecno Pouvoir 3 Air.
Tecno Pouvoir 3 Air Run on android 9.0 OS Which is Powered by Mediatek MT6761 Processor. it is a Dual SIM (GSM) Smartphone that accepts Nano-SIM. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM, 3G.
The Device Come With 1GB of RAM and 16GB of Internal Storage Can be Expandable Via SD card. In Camera Department it Come With 8Mp Rear Camera With 8MP front Shooter.
- Flashing the ROM Will Erase all Your Personal Data including Storage. So we advice You to First Make a Complete backup of your Phone.
- Please Do carefully, We are Not Responsible for any Damage to Your Device.
- Must backup NVRAM using this Guide before Doing anything.
- Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.
Product name: Tecno Pouvoir 3 Air
Type: Full ROM
Size: up to 1GB
SoC: Mediatek MT6761
Os: Android 9.0
Root access: Not
Product Version: LC6-H617CDE-PGo-190802V245
- Firmware Tecno Pouvoir 3 Air: Download
- SP flash tools 5.2 Here
- Mediatek Preloader V-COM Driver Here
How to Install Stock Firmware Flash Tecno Pouvoir 3 Air:
- Download & Extract Firmware
- Download & Extract tecno flash tool
- Install Mediatek VCOM driver on Computer
- open the tecno flash tool directory and open the ‘Sowtwaredownloadv4‘ folder and Right-Click on ‘SWD_AfterSales.exe‘ and select ‘run as administrator’ click ‘Yes’ wait for the program to Load
- click on grey ‘Settings icon’ on the top-Left corner of the screen.
- In the Popup Click load & Select MT6XX_Android_scatter.txt File From Firmware Folder
- Connect Your Switched of phone to Computer by Pressing volume up & down Key
- Click on Green ‘Start Icon’ on the top-left corner of the screen, Now Flashing will Started with a blue Status bar
- Once done, flashing bar will turn Green, now disconnect your phone from your computer & Switch it on.
Note: You can use SP Flash tool Instead Tecno Flash tool, Custom DA File Require..
- How to unlock Bootloader
- How to Repair IMEI Number
- Google Camera 6.1 Working HDR Plus Portrait Mod Slow Motion
So this is a Complete Guide to Download Firmware and Flash The Device. if You have any question Let Me Know via Comment.