Download Stock Firmware for Tecno KE5K:
Official Stock Firmware Flash File Now available for the Tecno KE5K & You can download it from below. The firmware come in scatter format which can be flash either with SP Flash tool or Miracle box.
Tecno KE5K Run on Android 10 and it is Powered by Mediatek Processor. it is a dual SIM (GSM) Smartphone that support Nano-SIM card. connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM 3G & 4G.
Must Require:
Why We Need Stock Firmware?
- to Downgrade a Phone
- to upgrade a Phone
- Fix Some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- Completely Re-Installation of Board Software
Pre-Requirement’s
- backup Your NVRAM using this Guide
- First Make a Complete backup of Your Personal data (if Possible)
- Charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Tecno KE5K
Type: Full ROM
Size: up to 1.9GB
SoC: Mediatek
Os: Android 10
Password: Null
Root access: Not
Gapps: Included
Firmware Version: KE5k-H6122CD-Q-OP-201015V94
Download Links:
| File Name | Version | Downloads |
| VCOM Driver | N/A | Download |
| SP Flash tools | V5.2 | Download |
| Firmware/Flash File | KE5k-H6122CD-Q-OP-201015V94 | Download |
How to Install Stock Firmware Tecno KE5K:
- Extract Downloaded Stock Firmware..
- Install Mediatek Vcom driver on Your computer.
- Download & Extract Smartphone Flash tools on computer
- From the Flash tool Folder Run SP_Flash_tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download Only. Click Download & Connect Your Switched off Phone.
- You can see Flashing Process On Screen. after Complete unplug & Switch it On
How to Flash Tecno KE5K using Tecno Flash tool:
- Install Mediatek driver on computer
- From the Tecno Flash tool folder Run SWD_AfterSales.exe
- click on grey ‘Settings icon’ on the top-Left corner of the screen.
- In the Popup click load & Select MT6XX_Android_scatter.txt File From Firmware Folder
- Connect Your switched of phone to computer by Pressing volume up & down Key
- Click on Green ‘Start Icon’ on the top-left corner of the screen, Now flashing will started with a blue Status bar
- Once done, flashing bar will turn Green, now disconnect your phone from your computer & switch it on.
Read also:
So this is a Complete Guide to Download Firmware and Flash The Device. if You have any question Let Me Know via Comment.