Stock ROM or Firmware refers to the version of the operating system that comes pre-installed on a device by the manufacturer. It is an unmodified version of the firmware that is distributed with a device and can be used to restore it to its original state.
Tecno Camon 20 Pro 5G CK8n Stock Firmware is useful for fixing issues such as hang on Logo, frp lock, fastboot Mode, display Blank or white after flash, dead recovery, dead after flash etc. for restoring a device to its original configuration. Stock ROMs are often specific to a particular device and are not interchangeable between different devices.
Note:
- Must Make a backup before process
- it will erase all your data Including Internal storage
Firmware Information: |
|
|---|---|
| Device Name | Tecno Camon 20 Pro 5G |
| ROM Type | Full ROM |
| SoC | Mediatek |
| OS | Android |
| Password | Null |
| Root Access | No |
| Firmware Version | check below List |
Download Links:
Firmware:
- CK8n-H931A-T- RU -V 1038: Download
- CK8n-H931ABC-T- GL -V 1243: Download
- CK8n-H931ABC-T-GL-230328V519 : Download
- CK8n -H931A-T- RU -230815V 1391: Download
Flash Tools:
- SP Flash tool: Download
- ROM2box Full Free: Download
- Contact Me for unbrick, FRP, Reset, Region Change & root (paid)
USB Driver:
- Mediatek USB Driver: Download
How to Flash Tecno Camon 20 Pro 5G CK8n Via SP Flash tool:
Note: a customized da & auth file needed.
- unpack downloaded Firmware using 7zip
- Install Mediatek Vcom driver on Your computer
- disable SLA Authentication by following this Guide (if not disabled You may face BROM error)
- Download & Extract smartphone flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- set connection like below image (option/connection)
- Go to Download tab Click Scatter and Load Scatter File from ROM folder
- Repeat Process and load DA and Auth file too
- from drop down Select ‘Download only‘
- Click ‘Download’
- turn Phone OFF, Now together Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key (make sure your phone stable in device manager)
- You will see a Yellow flashing bar with flashing Process. once done, unplug device and switch it ON
Read also: