How to Install Stock Firmware on Teclast T30 (T1P2)

Download Stock Firmware Flash File for Teclast T30 (T1P2):

Latest Firmware Flash File Now available for the Teclast T30 (T1P2) & You can Download it From Below. The Firmware come in Scatter format Which Can be Flash either with SP Flash tool or Miracle box. You can use it to unbrick Your device.

Teclast T30 (T1P2) Run on Android 9.0 & it is Powered by Mediatek helio P70 Processor. The device come with 4GB of RAM and 64GB Of Storage that can be expandable via SD card.

Must Require:

Why We Need Stock Firmware?

  • to Downgrade a Phone
  • to upgrade a Phone
  • Fix Some serious issue in phone
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • Completely Re-Installation of Board Software

Pre-Requirement’s

  • backup Your NVRAM using this Guide
  • First Make a Complete backup of Your Personal data (if Possible)
  • Charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: Teclast T30 (T1P2)
Type: Full ROM
Size: up to 1GB
SoC: Mediatek helio P70
Os: Android 9.0
Password: Null
Root access: Not
Gapps: Included
Firmware Version: T30(T1P1)_Android 9.0_V1.04_E43D

Download Links:

File NameVersionDownloads
VCOM DriverN/ADownload
SP Flash toolsV5.2028Download
Firmware/ Flash FileT30(T1P1)_Android 9.0_V1.04_E43DDownload

How to Install Stock Firmware on Teclast T30 (T1P2):

  • Extract Downloaded Official Stock ROM..
  • Install Mediatek Vcom Driver on Your PC.
  • Download & Extract SP Flash tools, Run SP Flash tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • Select Download OnlyClick Download & Connect Your Switched off Phone.

  • You can see Flashing Process On Screen. after Complete unplug & Switch it On
Read also:

So this is a Complete Guide to Download Firmware and Flash The Device. if You have any question Let Me Know via Comment.


LEAVE A REPLY

Please enter your comment!
Please enter your name here

14 − four =