How to Root & Install twrp Huawei CLT-AL01, CLT-L29, CLT-L29C P20 Pro

Root twrp Huawei CLT-AL01, CLT-L29, CLT-L29C P20-

There are many questions every day about how to root & Install twrp on Huawei CLT-AL01, CLT-L29, CLT-L29C P20. So that today we will talk about this topic. In the topic We are going to Share a Complete Guide to Root Huawei CLT-AL01, CLT-L29, CLT-L29C P20 by using the SuperSU and twrp Recovery.

Many peoples use Huawei CLT-AL01, CLT-L29, CLT-L29C P20 but few people know about rooting the phone . So the article For that Whom does Not Know How to Root. Root is Not Necessary for all Peoples but it Require to achieve Some advance features of the Device .

by Rooting the Phone You can improve Your phone’s performance even better. but it also Dangerous for  Newby. You can get the full information about ” Android root ” from Here. We can root our phone in two ways First one using the Computer and other one Without using the Computer. but The Huawei CLT-AL01, CLT-L29, CLT-L29C P20 is Not Rootable without a Computer So You Must have a PC to Root it. Let’s get Start The proces.


What is Rooting-


Rooting is the way to obtain Supersu Right’s on Android Devices, that means after Rooting the Phone You can unlock All features of the Device and you have Full Permission to Play with it. means you can Install custom ROM, Install Custom Mod’s and tweak your phone using various tricks. Rooting also Best way to Save battery because after Rooting you can Disable all Apps In Single Click and also you have Right to Remove Pre-Installed system app so you can Easily Uninstall Non Require System apps.


What is twrp ?


Team Win Recovery Project (TWRP) is an open-source software custom recovery image for Android-based devices. It provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, functions often unsupported by Stock recovery images.

Note-

1. This Guide is Work only on Listed Device. So please Don’t try it on any other Phone.
2. Flashing The ROM Will Erase all your Data, So Must create a backup of your Personal data before Flashing.
3. Please Do carefully, We are not Responsible for any damage, bootloop, or dead SD card’s.
4. Ensure that your Device at-least 50% charge During Flashing Process,to Stop the Accidentally Shut Down.
5. Follow all steps correctly otherwise it Will cause bootloop.

Must Require:

1. backup NVRAM
2. backup Your Personal data
3. Create a nandroid backup

Require tools and Files-

File NameDownload
twrp Huawei CLT-AL01, CLT-L29, CLT-L29C P20 [3.XX]Download
SuperSu/ MagiskDownload
adb fastboot DriverDownload
No-verity-opt-EncryptDownload
adb fastboot toolsDownload

How to Install twrp Recovery on Huawei CLT-AL01, CLT-L29, CLT-L29C P20-

Step 1. First of all unlock bootloader From Here, Then Download twrp Recovery for Your Device From above and extract[if zip or rar] inside a folder

Step 2. Download adb folder From above and Fastboot driver Installer From above

Step 3. then follow Bellow Instructions,

Step 4. Go to Setting>about Phone>type 7 time Build number > Back>Developer Option and Enable Device Debugging And Oem Unlock.

Step 5. Now Install Correct adb and fastboot Driver on Your pc, Go to adb folder connect device into pc open CMD Here and type command .

adb reboot bootloader

Step 6. Your Device Booted in Fastboot Mod To check Device connectivity type

fastboot devices

Step 8. Rename twrp to recovery.img and Move it in adb Folder,

Flash twrp on Huawei CLT-AL01, CLT-L29, CLT-L29C P20 using below Code:

fastboot flash ramdisk recovery.img

Reboot Huawei CLT-AL01, CLT-L29, CLT-L29C P20 to twrp using This Code:

fastboot boot recovery.img

Step9. Recovery is Now Flashed [installed] Your Phone also booted in twrp Make a System Reboot. or Flash zip if you Want.
Step 10. Done

How to Root Huawei CLT-AL01, CLT-L29, CLT-L29C P20

Step1. Download Magisk/superSu From above and Save it to Device storage [internatl/ external].
Step2. Switch of phone and Press power and volume up button to boot Device into twrp [Installed in above Step] or use code
adb reboot recovery
Step3. In the twrp Go to backup tab and Create a nadroid backup. Don’t forgot to include NVRAM or imei aka ESF.
Step4. Go to wipe tab and Do a factory Reset.only Do a factory Reset Do’t include other partition’s.
Step5. Go to Install tab and Locate Download SuperSu.zip and confirm Install, wait For Success Done.
Note- if the Device is Not Bootup after flashing the Supersu. use [Flash] Noverity disabler to Disable boot verification.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

six + eighteen =