Oukitel RT1 Firmware Flash File MT6762 11.0

Download Stock Firmware Flash File for Oukitel RT1:

Official Stock Firmware/ Flash File Now available for the Oukitel RT1 & You can download it from below. by using this firmware you can solve all software Issues with in your Oukitel RT1 such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.

Oukitel RT1 Run on Android 11 and it is Powered by Mediatek MT6762 Processor. connectivity features Include hotspot, GPS, WIFI & bluetooth. The device come with 4GB of RAM and 64GB of storage that can be expandable via SD card.

Must Require:

Why We Need Stock Firmware?

  • to downgrade a device
  • to upgrade a device
  • Fix some serious issue in device
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on a device
  • completely Re-Installation of board software

Pre-Requirement’s

  • backup NVRAM using this guide
  • first make a complete backup of your Personal data (if Possible)
  • charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: Oukitel RT1
Type: Full ROM
Size: up to 1.82GB
SoC: MT6762
Os: Android 11
Password: Null
Gapps: Included
Root access: Not
Firmware Version: OUKITEL_RT1_EEA_V06_20211022

Download Links:

How to Install Stock Firmware on Oukitel RT1:

  • Extract Downloaded firmware.
  • Install Mediatek VCOM driver on Your computer.
  • Download & extract smartphone Flash tools on your computer
  • from the flash tool folder Run flash_tool.exe

  • Go to Download tab Click Scatter and load scatter file from ROM folder

  • select Download only. Click Download & connect Your switched off Phone to computer by Pressing volume up & down key (in switch off Mod)

  • flashing Process Started. once done, unplug device & switch it ON

Note: if there is no USB device then you have to check for USB driver or try test Point

Read also:

have any issue, Let me know via comment