Meizu 20 Pro Firmware Flash File (Stock ROM)

Stock ROM or Firmware refers to the version of the operating system that comes pre-installed on a device by the manufacturer. It is an unmodified version of the firmware that is distributed with a device and can be used to restore it to its original state.

Meizu 20 Pro Stock Firmware is useful for fixing issues such as hang on Logo, frp lock, fastboot Mode, display Blank or white after flash, dead recovery, dead after flash etc. for restoring a device to its original configuration. Stock ROMs are often specific to a Particular device and are not interchangeable between different devices.

Note:

  • make a backup before Process
  • it will erase all your data Including Internal Storage
Must Require:
Firmware Information:
Device Name Meizu 20 Pro
ROM Type Full ROM
SoC Qualcomm 8 Gen2
OS Android 13xx
Password Null
Root Access No
Region Check below list
Firmware Version Check below list

Downloads Links:

Full OTA:

Flash Tools:

usb driver: 

How to Flash Meizu 20 Pro Via EDL:

  • Download and install Mi Flash Tool on your computer. You can download the latest version of Mi Flash Tool from the above download section.
  • Download the appropriate Firmware package for your device. Make sure to download the correct firmware package that matches your device model and region
  • Extract the firmware package to a folder on your computer
  • Install Qualcomm usb driver on your computer, You can download the latest version of qualcomm driver from the above download section.
  • Open Mi Flash Tool on your computer.
  • Connect your device to your computer using a USB cable. the device must be in 9008 EDL Mod

  • In Mi Flash Tool, click on the “SELECT” button and navigate to the folder where you extracted the Firmware package in above step.
  • In Mi Flash tool, click on the “REFRESH” button to detect your device.
  • Once your device is detected, click on the “Flash” button in Mi Flash Tool to start the firmware flashing process.
  • Wait for the firmware flashing process to complete. Do not disconnect your device from the computer during this process.

  • Once the firmware flashing process is complete, you will see a “Success” message in Mi Flash Tool. disconnect device & switch it ON.

How to Install recovery ROM:

  • enable adb sideload in stock recovery
  • send package via adb
adb sideload 'update.zip'

Flashing Recovery ROM via Fastboot:

  • extract update rom (payload.bin) using payload dumper
  • use fastboot flash in this format
fastboot flash 'partition name' 'filename'
Read also: