How to Install Stock Firmware on Hotwav Venus R6

Download official Firmware/Flash File for Hotwav Venus R6:

official Stock Firmware/ Flash File Now available for the Hotwav Venus R6 & You can Download it from below. Official Firmware For Hotwav Venus R6 Will help You to Restore Your bricked device.

Hotwav Venus R6 Run on android 6.0 & it is Powered by  Spreadtrum Processor. it is a Dual SIM Smartphone Support Nano GSM SIM Card, Connectivity Option’s Include 3G GPS, Wi Fi, Bluetooth etc. Sensor Include Goryo Proximity Gravity etc.

Why We Need Stock Firmware?

  • to Downgrade a Phone
  • to upgrade a Phone
  • Fix Some serious issue in phone
  • Remove FRP Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • Completely Re-Installation of Board Software

Pre-Requirement’s

  • First Make a Complete backup of Your Personal data (if Possible)
  • Charge the device at least 50% to prevent accidental shut down during the process
Must Require:

Firmware Information:

Product Name: Hotwav Venus R6
Type: Full ROM
ROM Size: up to 660MB
SoC: Spreadtrum SC7731C
Os: Android 6.0
Password: Null
Gapps: Included
Root access: Not
Firmware Version: Venus_R6_SP7731C_19052017_6.0_MIRA

Downloads:

File Name Version Downloads
SPD Driver R4.20.0201 Download
SPD tools R24 Download
Firmware/ Flash File Venus_R6_SP7731C_19052017_6.0_MIRA Download

How to Install Stock Firmware on Hotwav Venus R6:

    1. Download and Install SPD Driver From above
    2. Download and Extract ROM File and Flash tools From above
    3. Run Flash tools and Click Load Package.
    4. Now Select Pac file from the Downloaded ROM folder
    5. Click Download and Connect Your Switched off Phone.
    6. Done/

Check other articles-