iHunt S30 Ultra Apex 2021 Firmware Flash File MT6771 10.0

Download Stock Firmware Flash File for iHunt S30 Ultra Apex 2021:

Official Stock Firmware/ Flash File Now available for the iHunt S30 Ultra Apex 2021 & You can download it from below. by using this firmware you can solve all software Issues with in your iHunt S30 Ultra Apex 2021 such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.

iHunt S30 Ultra Apex 2021 Run on Android 10 and it is Powered by Mediatek MT6771 Processor. it is a dual SIM smartphone support Nano SIM card, connectivity Options Include hotspot, GPS, WIFI & bluetooth. The device come with 4GB of RAM & 64GB of Storage that can be expandable via SD card.

Must Require:

Why We Need Stock Firmware?

  • to downgrade a device
  • to upgrade a device
  • Fix some serious issue in device
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on a device
  • completely Re-Installation of board software

Pre-Requirement’s

  • backup NVRAM using this guide
  • first make a complete backup of your Personal data (if Possible)
  • charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: iHunt S30 Ultra Apex 2021
Type: Full ROM
Size: up to 2GB
SoC: Mediatek
Os: Android 10
Password: Null
Gapps: Included
Root access: Not
Firmware Version: iHunt_S30_Ultra_Apex_2021_MT6771_EEA_V01_201117

Download Links:

How to Install Stock Firmware on iHunt S30 Ultra Apex 2021:

  • Extract Downloaded firmware
  • Install Mediatek VCOM driver on Your computer
  • Download & extract smartphone Flash tools on your computer
  • from the flash tool folder Run flash_tool.exe

  • Go to Download tab Click Scatter and load scatter file from ROM folder

  • select Download only. Click Download & connect Your switched off Phone to computer by Pressing volume up & down key (in switch off Mod)

  • flashing Process started. once done, unplug device & switch it ON

Note: if there is no USB device then you have to check for USB driver or try test Point

Read also:

have any issue, Let me know via comment