Galaxy S10 5G SM-G977B Combination Firmware FRP bypass

Download Samsung Galaxy S10 5G SM-G977B Combination Firmware:

Download Combination Firmware Flash File For Samsung Galaxy S10 5G SM-G977B If you own Samsung Galaxy S10 5G SM-G977B Smartphone and You want to Download the Combination Stock ROM /Flash File/For it then You are on a Correct Place, You have to do this by following the Below Guide.

in Most of Cases Combination ROM Can be used to Fix FRP & bootloop Issue on Samsung Devices. Now You Can use below ROM to Fix FRP & bootloop issue on Samsung Galaxy S10 5G SM-G977B.

Samsung Galaxy S10 5G SM-G977B Smartphone Run on android 9.0 OS Which is Powered by a Exynos 9820 Processor. it is a Single SIM (GSM) Smartphone that accepts Nano-SIM, Connectivity options Include Wi-Fi, GPS, Bluetooth, USB OTG, FM, 3G and 4G.

The Device Come with 8GB of RAM and 256Gb of Storage Can’t be expandable.in Camera Department it Come with 12.19+12+16Mp rear Camera With 10MP Front Shooter.

Note-

1. Flashing the ROM Will erase all Your Personal Data including Storage. So we advice You to First take a Complete backup of your Phone.
2. Please Do carefully, We are Not Responsible for any Damage to Your Device.
3. Must backup NVRAM using this Guide before Doing anything.
4. Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.

Must Require:

1. backup NVRAM
2. Create a nandroid backup
3. backup Your Personal data

Firmware information:

Product name: SM-G977B
Type: Combination ROM
Size: up to 4GB
SoC: Exynos 9820
Os: Android 9.0
Password: Null
Root access: Not
Gapps: included
Product Version: SM-G977B FAC_FA90_G977BXXU1ASD7

Download :

  • Firmware Galaxy S10 5G SM-G977B: Download

Flash Tools:

Driver: 

How to Install Combination Firmware on Galaxy S10 5G SM-G977B:

1) Download tools and Combination ROM From above. Then Extract odin and ROM File.

2) Install Samsung Driver on PC. Run Odin.exe From tool Folder.

3) Now Reboot Phone to Download Mod and Connect to PC with usb

4) You can see added msg. Make sure that only these two options are tick “Auto Reboot” and “F.Reset Time“ Make sure re-partition is Not checked.

5) Now Extract & Load Full Firmware under AP, BL, CP and HOME_CSC Section and Click Start/Download

6 ) Wait For Success/ Done.

Read also:
  1. How to unlock Bootloader
  2. How to Repair IMEI Number

So this is a Complete Guide to Download Firmware and Flash This Device. if You have any question Let Me Know via Comment.