G-Tab C3 Flash File Firmware SC7731e 9.0

Download official Firmware/Flash File for G-Tab C3:

official stock Firmware/ Flash File Now available for the G-Tab C3 & You can download it from below. The firmware come in PAC format which is flashable with spreadtrum upgrade tool or upgrade research/download tool. by using this firmware you can solve all software Issues on your G-Tab C3 such as hang on Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.

G-Tab C3 Run on Android 9.0 & it is Powered by  Spreadtrum SC7731e Processor. connectivity Option’s Include GPS, Wi-Fi, hotspot & bluetooth. the device come with 1GB of RAM and 16GB of storage that can be expandable via SD card.

Why We Need Stock Firmware?

  • to downgrade a Phone
  • to upgrade a Phone
  • fix some serious issue in phone
  • remove FRP Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • completely Re-Installation of board software

Pre-Requirement’s

  • first make a complete backup of your Personal data (if possible)
  • charge the device at least 50% to prevent accidental shut down during the process
Must Require:

Firmware Information:

Device Name: G-Tab C3
Type: Full ROM
ROM Size:
up to 1GB
SoC: SC7731
Os: Android 9.0
Password: Null
Gapps: Included
Root access: Not
Firmware Version: C3 _G-Tab-YJ-20200102

Download Links:

How to Install Stock Firmware on G-Tab C3:

    1. Download and Install SPD Driver from above
    2. Download and Extract ROM File and Flash tools From above
    3. Run Flash tools and Click Load Package.
    4. Now Select Pac file from the downloaded ROM folder
    5. Click Download and connect Your switched off Phone.
    6. done/

Check other articles-