Casper Via S Firmware Flash File MT6765 9.0

Download Stock Firmware Flash File for Casper Via S:

Official Stock Firmware Now available for the Casper Via S & You can download it from below. by using this firmware you can solve all software Issues with in your Casper Via S such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.

Casper Via S Run on Android 9.0 and it is Powered by Mediatek MT6765 Processor. it is a dual SIM smartphone Support nano SIM card, connectivity features Include hotspot, GPS, WIFI & bluetooth. The device come with 4GB of RAM and 64GB of Storage that can be expandable via SD card.

Pre-Requirement’s

  • backup NVRAM using this guide
  • make a complete backup of your device
  • charge the device at least 50% to prevent accidental shut down during the process

Note:

  • disable auth by following this Guide Win / Linux (optional if any error)
  • The firmware is for Repairing purpose only, You have to manage risk accordingly
  • downgrade via flash tools work’s on Most of devices but I don’t know about this device
  • a customized MTK DA file is Require to bypass ‘Download agent Authentication‘ you can Search our site for custom DA file

Firmware Information:

Device Name: Casper Via S
Type: Full ROM
Size: up to 1.3GB
SoC: Mediatek MT6765
Os: Android 10
Password: Null
Gapps: Included
Root access: Not
Firmware Version: Casper_VIA S_MT6765_9.0

Download Links:

How to Install Stock Firmware on Casper Via S:

  • Download & Extract firmware on your computer
  • Install Mediatek VCOM driver on Your computer
  • Download & Extract smartphone flash tools on your computer
  • from the flash tool folder Run flash_tool.exe

  • Go to Download tab Click Scatter and load scatter file from ROM folder

  • select Download only. Click Download
  • connect Your switched off Phone to computer by using usb cable (USB +Volume up and down key) (make sure all driver are installed, if no usb VCOM device then you have to do test point)

  • flashing Process started. once done, unplug device & switch it ON
Read also:

have any issue, Let me know via comment