Tecno Pop 5 Go BD1 Firmware Flash File SC7731e 11.0

Download official Firmware/Flash File for Tecno Pop 5 Go BD1:

official stock Firmware/ Flash File Now available for the Tecno Pop 5 Go BD1 & You can download it from below. by using this firmware you can solve all software Issues with in your Tecno Pop 5 Go BD1 such as hang on Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.

Tecno Pop 5 Go BD1 Run on Android 11 & it is Powered by Spreadtrum SC7731e Processor. it is a dual SIM smartphone support Nano SIM cards, connectivity Option’s Include GPS, Wi-Fi, hotspot, bluetooth etc. the device come with 1GB of RAM and 16GB of Storage that can be expandable via SD card.

Why We Need Stock Firmware?

  • to downgrade a device
  • to upgrade a device
  • remove FRP Pattern and Pin lock
  • completely Re-Installation of board software

Pre-Requirement’s

  • first make a complete backup of your Personal data (if possible)
  • charge the device at least 50% to prevent accidental shut down during the process
Must Require:

Firmware Information:

Device Name: Tecno Pop 5 Go BD1
Type: Full ROM
ROM Size:
up to 1.5GB
SoC: SC7731e
Os: Android 11
Password: Null
Gapps: Included
Root access: Not
Firmware Version: Tecno_Pop_5_Go_BD1_SP575AB_V8_211111

Download Links:

How to Install Stock Firmware on Tecno Pop 5 Go BD1:

    1. Download and Install SPD Driver on your computer
    2. Download and Extract Firmware File and Flash tools
    3. Run SPD Flash tool and Click load Package
    4. Now Select Pac file from the downloaded ROM folder
    5. Click Download and connect Your switched off Phone
    6. done

Check other articles: