How to Root Nokia 6 TA-1000/TA-1003 100% Working twrp 3.2.1 MI Flash

Root twrp Nokia 6 TA-1000/TA-1003-

twrp Recovery Now Released For the Nokia 6 TA-1000/TA-1003 and Finally We have A Solution to Root it. So that today we will talk about this topic. In the topic We are going to Share a Complete Guide to Root Nokia 6 TA-1000/TA-1003 by using the SuperSU and twrp Recovery.

Many peoples use Nokia 6 TA-1000/TA-1003 but few people know about rooting the phone . So the article For that Whom does Not Know How to Root. Root is Not Necessary for all Peoples but it Require to achieve Some advance features of the Device .

by Rooting the Phone You can improve Your phone’s performance even better. but it also Dangerous for  Newby. You can get the full information about ” Android root ” from Here. We can root our phone in two ways First one using the Computer and other one Without using the Computer. but The Nokia 6 is Not Rootable without a Computer So You Must have a PC to Root it. Let’s get Start The proces.

Note-

1. This Guide is Work only on Listed Device. So please Don’t try it on any other Phone.
2. Flashing The ROM Will Erase all your Data, So Must create a backup of your Personal data before Flashing,
3. Please Do carefully, We are not Responsible for any damage, bootloop, or dead SD card’s.
4. Ensure that your Device at-least 50% charge During Flashing Process,to Stop the Accidentally Shut Down.
5. Follow all steps correctly otherwise it Will cause bootloop.

Features of TWRP Recovery:

  • You can flash Custom ROM on
  • You can flash modding zip files to customize your phone
  • Easy to flash and use Xposed Modules using TWRP
  • Easy to Root and Unroot using TWRP Recovery flashable zip SuperSU
  • You can install Magisk on
  • You can always take FULL NANDROID Backup in case of any modding or flashing.
  • Easy access to restore the Nandroid Backup.
  • You can flash the image file using TWRP Recovery
  • Easy to remove all bloatware using TWRP Recovery
  • To underclock and overclock.
  • You can clean Wipe, Cache, and Data.
Must Require:

1. backup NVRAM
2. backup Your Personal data
3. Create a nandroid backup

Require tools and Files-

File Name Download
twrp Nokia 6 TA-1000/TA-1003 Password: romprovider.com Download
SuperSu/ Magisk Download
QD Loader Driver Download
No-verity-opt-Encrypt Download
Mi Flash Download

How to Install twrp Recovery on Nokia 6 TA-1000/TA-1003-

Step 1. Download twrp Recovery for Your Device From above and extract[if zip or rar]

Step 2. Move the Magisk.zip and No-verity-opt-Encrypt.zip to Phone’s Storage.  Download & Install QD loader Driver On Your PC

Step 3. Run Mi Flash and Load Require Files from the twrp Folder,

Step 4. On Phone Go to Setting>about Phone>type 7 time Build number > Back>Developer Option and Enable Device Debugging And Oem Unlock.

Step 5. Completely Switch off Your Phone and then Press Volume Up and Down Button [together] and Connect your Phone to PC. You can See EDL or COM on QFIL Screen [if Driver Installed Properly]

Step 6. Click Download

Step7. Wait for success. Done

Step 8. Do Not Reboot Your Phone. Long Press Volume up and Down Button together to boot in twrp Then Follow Below Steps to Root. Must Require otherwise it will cause bootloop.

How to Root Nokia 6 TA-1000/TA-1003-

Step 1. Download Magisk/superSu From above and Save it to Device storage [internatl/ external].
Step 2. Switch of phone and Press power and volume up button to boot Device into twrp [Installed in above Step] or use code
adb reboot recovery
Step 3. In the twrp Go to backup tab and Create a nandroid backup. Don’t forgot to include NVRAM or imei aka EFS.
Step 4. Go to wipe tab and Do a factory Reset.only Do a factory Reset Do’t include other partition’s.
Step 5. Go to Install tab and Locate Download SuperSu.zip and confirm Install, wait For Success Done.
Step 6: again to Install tab locate No verity Disabler.zip and Confirm Install. Done Reboot system Now.