ZTE Blade 10 Flash File Firmware, How to Flash

Download Stock Firmware for ZTE Blade 10:

Official Stock Firmware Flash File Now available for the ZTE Blade 10 & You can download it from below. You can use this firmware to unbrick your phone by using Flash tool.

ZTE Blade 10 Run on Android 9.0 and it is Powered by Mediatek helio P60 Processor. it is a dual SIM (GSM) Smartphone that support Nano-SIM card. connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM & 3G. The device come with 3GB of RAM and 64GB of Storage that can be expandable via SD card

Must Require:

Why We Need Stock Firmware?

  • to Downgrade a Phone
  • to upgrade a Phone
  • Fix Some serious issue in phone
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on Phone
  • Completely Re-Installation of Board Software

Pre-Requirement’s

  • backup Your NVRAM using this Guide
  • First Make a Complete backup of Your Personal data (if Possible)
  • Charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: ZTE Blade 10
Type: Full ROM
Size: up to 2GB
SoC: Mediatek helio P60
Os: Android 9.0
Password: Null
Root access: Not
Gapps: Included
Firmware Version: Z6530MV1.0.0B16_DL

Download Links:

File Name Version Downloads
VCOM Driver N/A Download
SP Flash tools V5.2 Download
Firmware/Flash File Z6530MV1.0.0B16_DL Download

How to Install Stock Firmware on ZTE Blade 10:

  • Download & Setup ZAST tool on Your computer, Install ZTE usb Driver
  • Power off the device. Don’t connect the USB cable to the laptop or PC, Hold the Volume Down key and then press the Power button at the same time.
  • Your Device Rebooted in FTM Mod Now Connect it to Computer by using USB cable

 

  • Run ZAST In the Information Section You can see- port, device model, software version number and other basic information. Click on the “Information” button to view it.

  • Click “Download” on the menu bar.
  • under the file location browse Software File
  • under the XML Section Select the Folder where you want to store Log

  • at the bottom Click Download, After the download is complete, the flash tool will display the result of the download, Now disconnect your Phone and boot it up
  • You can Download ZAST (ZTE after Sale tool) From Here : http://support.zte.com.cn

How to Flash ZTE Blade V10 using SP Flash tool:

  • Extract downloaded stock firmware..
  • Install Mediatek Vcom driver on Your computer.
  • Download & Extract smartphone Flash tools on computer
  • From the flash tool folder Run SP_Flash_tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • Select Download onlyClick Download & Connect Your switched off Phone.

  • You can see Flashing Process On Screen. after Complete unplug & Switch it On
Read also:

So this is a Complete Guide to Download Firmware and Flash The Device. if You have any question Let Me Know via Comment.