Download official Firmware (Stock ROM) for Teracube 2e 2021:
Official Stock Firmware Now available for the Teracube 2e 2021 & You can download it from below. by using this firmware you can solve all software Issues with in your Teracube 2e 2021 such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
Teracube 2e 2021 Run on Android 11 and it is Powered by Mediatek Processor. it is a dual SIM smartphone support nano SIM card, connectivity features Include hotspot, GPS, wifi & bluetooth. the device come with 4GB of RAM & 64GB storage that can be expandable via SD card.
Pre-Requirement’s
- backup NVRAM using this guide
- make a complete backup of your device
- charge the device at least 50% to prevent accidental shut down during the process
Note:
- (optional) disable auth by following this Guide
- The firmware is for Repairing purpose only, You have to manage risk accordingly
Firmware Information:
Device Name: Teracube 2e 2021
Type: Full ROM
Size: up to 2-4GB
SoC: Mediatek
Os: Android 11
Password: Null
Gapps: Included
Root access: Not
Firmware Version: Teracube_2e_A11_05_20211102
Download Links:
How to Install Stock Firmware on Teracube 2e 2021:
- Download & Extract firmware on your computer
- Install Mediatek VCOM driver on Your computer
- Download & Extract smartphone flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and load scatter file from ROM folder
- select Download only.
- Click Download
- connect Your switched off Phone to computer by using usb cable (USB +Volume up and down key) (make sure all driver are installed, if no usb VCOM device then you have to do test point)
- flashing Process started. once done, unplug device & switch it ON
Read also:
have any issue, Let me know via comment