Tecno POP 5 Lte XQ656S Test Point Reboot EDL (SPRD)

The EDL test point is typically a set of pins on the device’s circuit board that can be shorted together in order to put the device into EDL mode. In EDL mode, the device can communicate with a computer and receive new firmware or software through a specialized tool such as upgrade download tool.

to enable EDL Mod on Your Tecno POP 5 Lte XQ656S You have to do test Point, which can be done by following the below instructions.

Note:

  • test point require additional device disassemble knowledge, do at own risk

How to Reboot Tecno POP 5 Lte XQ656S to EDL Mod:

  • Install Spreadtrum driver on your computer
  • Remove back cover of the Phone & Find the test point as show In below Image
  • keep shorting the test point using a copper wire or tweezer and Insert USB
  • check qcom usb device under COM Port in device manager…if no device, try again

test Point for Tecno POP 5 Lte XQ656S

Related: