Tecno CC7 Firmware Flash File MT6762 9.0

Download Stock Firmware/Flash File For Tecno CC7:

Download Official Stock Firmware Flash File For Tecno CC7. If You own Tecno CC7 Smartphone and You want to Download the Stock ROM /Flash File/For it then You are on a Correct Place, You have to do this by following the Below Guide.

Tecno CC7 Run on android 9.0 & it is Powered by Mediatek MT67762 Processor. it is a Dual SIM (GSM) Smartphone Support Nano-SIM Card’s, Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM, 3G.

The device come with 4GB of RAM and 64GB of Storage can be expandable via SD Card. in camera department it come with 16+8+2MP Rear camera with 16MP Front Shooter.

Note:

  • Must backup NVRAM using this Guide
  • Please Do carefully, we are not Responsible for any damage to Your device.
  • Flashing the ROM Will Erase all Your Personal Data Including Storage. So we advice You to First Make a Complete backup of Your Phone.
  • Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.
Must Require:

Firmware Information:

Device Name: Tecno CC7
Type: Full ROM
Size: up to 2GB
SoC: Mediatek
Os: Android 9.0
Password: Null
Root access: Not
Gapps: Included
Firmware Version: CC7-H626ABC-P-191216V230

Download Links:

Firmware :

Flash Tools:

Driver: 

  • Mediatek Preloader V-COM Driver Here

How to Flash Tecno CC7

  • Extract Downloaded Stock Firmware..
  • Install Mediatek Vcom driver on Your computer.
  • Download & Extract Smartphone Flash tools on computer
  • From the Flash tool Folder Run SP_Flash_tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • Select Download Only. Click Download & Connect Your Switched off Phone.

  • You can see Flashing Process On Screen. after Complete unplug & Switch it On

How to Flash Tecno CC7 using Tecno Flash tools:

  • Install Mediatek driver on computer
  • From the Tecno Flash tool folder Run SWD_AfterSales.exe
  • click on grey ‘Settings icon’ on the top-Left corner of the screen.
  • In the Popup click load & Select  MT6XX_Android_scatter.txt File From Firmware Folder
  • Connect Your switched of phone to computer by Pressing volume up & down Key
  • Click on Green ‘Start Icon’ on the top-left corner of the screen, Now flashing will started with a blue Status bar

  • Once done, flashing bar will turn Green, now disconnect your phone from your computer & switch it on.

Read also:

So this is a Complete Guide to Download Firmware and Flash The Device. if You have any question Let Me Know via Comment.