Tecno Spark 5 Air KD6A Flash File Firmware

Download Stock Firmware/Flash File For Tecno KD6A:

Official Stock Firmware Flash File have now been available for the Tecno KD6A & Now You can Download it From Below. Official Stock Firmware for Tecno KD6A  Will help You to Restore Your Bricked device. the Firmware come in Scatter format Which Can be Flash either with SP Flash tool or Miracle box.

Tecno KD6A Run on android 10 & it is Powered by Mediatek MT6761 Processor. it is a Dual SIM (GSM) Smartphone that Support Nano-SIM Card. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM, 3G & 4G.

Note-

  • Must backup NVRAM using this Guide
  • Please Do carefully, we are not Responsible for any damage to Your device.
  • Flashing the ROM Will Erase all Your Personal Data Including Storage. So we advice You to First Make a Complete backup of Your Phone.
  • Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.
Must Require:

Firmware Information:

Device Name: Tecno KD6A
Type: Full ROM
Size: up to 2GB
SoC: Mediatek MT6761
Os: Android 10
Password: Null
Root access: Not
Gapps: Included
Firmware Version: KD6a-H6118AC-QGo-OP-200506V145

Downloads:

Firmware Links:

Flash Tools:

Driver: 

  • Mediatek Preloader V-COM Driver: Download

How to Install Stock Firmware on Tecno KD6A:

  • Extract Downloaded Stock Firmware..
  • Install Mediatek Vcom driver on Your computer.
  • Download & Extract Smartphone Flash tools on computer
  • From the Flash tool Folder Run SP_Flash_tool.exe

  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • Select Download OnlyClick Download & Connect Your Switched off Phone.

  • You can see Flashing Process On Screen. after Complete unplug & Switch it On

How to Flash Tecno KD6A using Tecno Flash tools:

  • Install Mediatek driver on computer
  • From the Tecno Flash tool folder Run SWD_AfterSales.exe
  • click on grey ‘Settings icon’ on the top-Left corner of the screen.
  • In the Popup click load & Select  MT6XX_Android_scatter.txt File From Firmware Folder
  • Connect Your switched of phone to computer by Pressing volume up & down Key
  • Click on Green ‘Start Icon’ on the top-left corner of the screen, Now flashing will started with a blue Status bar

  • Once done, flashing bar will turn Green, now disconnect your phone from your computer & switch it on.

Read also:

So this is a Complete Guide to Download Firmware and Flash The Device. if You have any question Let Me Know via Comment.