Download Stock Firmware Flash File for Teclast M6P1:
Latest Firmware Flash File Now available for the Teclast M6P1 & You can Download it From Below. The Firmware come in Scatter format Which Can be Flash either with SP Flash tool or Miracle box. You can use it to unbrick Your device.
Teclast M6P1 Run on Android 8.0 & it is Powered by Mediatek MT6797 Processor. The Device come with 4GB of RAM and 128GB of Storage that can be expandable via SD card.
Must Require:
Why We Need Stock Firmware?
- to Downgrade a Phone
- to upgrade a Phone
- Fix Some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- Completely Re-Installation of Board Software
Pre-Requirement’s
- backup Your NVRAM using this Guide
- First Make a Complete backup of Your Personal data (if Possible)
- Charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Teclast M6P1
Type: Full ROM
Size: up to 1GB
SoC: Mediatek MT6797
Os: Android
Password: Null
Root access: Not
Gapps: unknown
Firmware Version: M16(M6P1)_Android 8.0_V1.10_9C60
Download Links:
| File Name | Version | Downloads |
| VCOM Driver | N/A | Download |
| SP Flash tools | V5.2020 | Download |
| Firmware/ Flash File | M16(M6P1)_Android 8.0_V1.10_9C60 | Download |
How to Install Stock Firmware on Teclast M6P1:
- Extract Downloaded Official Stock ROM..
- Install Mediatek Vcom Driver on Your PC
- Download & Extract SP Flash tools, Run SP Flash tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download Only. Click Download & Connect Your Switched off Phone
- You can see Flashing Process On Screen. after Complete unplug & Switch it On
Read also:
So this is a Complete Guide to Download Firmware and Flash The Device. if You have any question Let Me Know via Comment.