How to Install Stock Firmware on Senseit W289

Download Stock Firmware/Flash File For Senseit W289:

Download Official Stock Firmware Flash File For Senseit W289. If You own Senseit W289 Smartphone and You want to Download the Stock ROM /Flash File/For it then You are on a Correct Place, You have to do this by following the Below Guide.

Senseit W289 Run on android 7.0 & it is Powered by Mediatek MT6737 Processor. it is a Dual SIM (GSM) Smartphone Support Nano-SIM Card, Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM, 3G.

the device come with 2GB of RAM and 16GB of Storage can be expandable via SD card. in camera department it come with 8MP Rear Camera With 5MP Front Shooter.

Note-

  • Must backup NVRAM using this Guide
  • Please Do carefully, we are not Responsible for any damage to Your device.
  • Flashing the ROM Will Erase all Your Personal Data Including Storage. So we advice You to First Make a Complete backup of Your Phone.
  • Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.
Must Require:

Firmware Information:

Device name: Senseit W289
Type: Full ROM
Size: up to 2GB
SoC: Mediatek MT6737
Os: Android 7.0
Password: Null
Root access: Not
Gapps: Included
Firmware Version: SENSEIT_W289_V02_20180306

Downloads:

Firmware :

Flash Tools:

Driver: 

  • Mediatek Preloader V-COM Driver: Here

How to Install Stock Firmware Senseit W289:

  • Download and Install Mediatek Vcom Driver on Your PC.
  • Download & Extract SP Flash tools, Run SP Flash tool.exe
  • Go to Download tab Click Scatter and Load Scatter File from ROM Folder

  • Select Download Only. Click Download & Connect Your Switched off Phone.

  • You can see Flashing Process On Screen. after Complete unplug & Switch it On
  • Detailed Guide With Images: For Flash tools follow This Guide: Here For OTA update Follow this Guide : Here
Read also:

So this is a Complete Guide to Download Firmware and Flash The Device. if You have any question Let Me Know via Comment.