How to Install twrp Recovery Root Cubot King Kong

Root twrp Cubot King Kong:

twrp Recovery now Released For the Cubot King Kong In the topic We are Going to Share a Complete Guide to Root Cubot King Kong by using the SuperSU and twrp Recovery.

Many peoples use Cubot King Kong but few people know about rooting the phone . So the article For that Whom does Not Know How to Root. Root is Not Necessary for all Peoples but it Require to achieve Some advance features of the Device .

by Rooting the Phone You can improve Your phone’s performance even better. but it also Dangerous for  Newby. You can get the full information about ” Android root ” from Here. We can root our phone in two ways First one using the Computer and other one Without using the Computer. but The Cubot King Kong is Not Rootable without a Computer So You Must have a PC to Root it. Let’s get Start The process.

Note-

1. This Guide is Work only on Listed Device. So please Don’t try it on any other Phone.
2. Flashing The ROM Will Erase all your Data, So Must create a backup of your Personal data before Flashing,
3. Please Do carefully, We are Not Responsible for any Damage, bootloop, or dead SD card’s.
4. Ensure that your Device at-least 50% charge During Flashing Process,to Stop the Accidentally Shut Down.
5. Follow all steps correctly otherwise it Will cause bootloop.

Features of TWRP Recovery:

• You can Flash Custom ROM on
• You can flash modding zip files to customize your phone
• Easy to flash and use Xposed Modules using TWRP
• Easy to Root and unroot using TWRP Recovery flashable zip SuperSU
• You can install Magisk on
• You can always take FULL NANDROID Backup in case of any modding or flashing.
• Easy access to restore the Nandroid Backup.
• You can flash the image file using TWRP Recovery
• Easy to remove all bloatware using TWRP Recovery
• To underclock and overclock.
• You can clean Wipe, Cache, and Data.

Must Require:

1. backup NVRAM
2. backup Your Personal data
3. Create a nandroid backup

Download-

Pre-Requirement’s:

1. unlocked bootloader [use below Guide]
2. PC and usb
3. adb tools Setup, Download and extract in a folder.
4. Move recovery File to adb folder [must rename it [recovery.img]
5. Install adb fastboot Driver
6. enable usb debugging and oem unlock

How to Install twrp Recovery on Cubot King Kong:

Step 1. Download twrp Recovery From above and extract in adb Folder [also Download and  extract From above]

Step 2. Download & Install adb fastboot Driver On Your PC

Step 3. then follow Bellow Instructions,

Step 4. Go to Setting>about Phone>type 7 time Build number > Back>Developer Option and Enable Device Debugging and oem unlock.

Step 5. Now Install Correct adb and fastboot Driver on Your PC[Skip if Installed], Go to adb folder[Extracted in above step] Connect Device to PC using usb open CMD Here and type command .

adb reboot bootloader

Step 6. Your Device Booted in Fastboot Mod To check Device connectivity type

fastboot devices

Step 7. unlock bootloader:

fastboot oem unlock

fastboot flashing unlock

Step 8. Rename twrp to recovery.img and Move it in adb Folder(if Done skip it),

Flash twrp on Cubot King Kong using below Code:

fastboot flash recovery recovery.img

Reboot Cubot King Kong to twrp using This Code:

fastboot boot recovery.img

Step 9. Recovery is Now Flashed [installed] Your Phone also booted in twrp Make a System Reboot. or Flash zip if you Want.
Step 10. Done