Download Motorola E32s XT2229-2 Flash File Firmware:
Official Stock Firmware Now available for Motorola XT2229-2 and You can download it from below. by using this firmware you can solve all software Issues with in your Motorola XT2229-2 such as hang on Logo, frp lock, Fastboot Mode, display blank or white after Flash, dead recovery, dead after flash etc.
Motorola XT2229-2 Run on Android 12 and it is Powered by Mediatek MT6765 Processor. it is a dual SIM smartphone support Nano SIM card, connectivity features Include GPS WIFI hotspot Bluetooth 3G & 4G. The device come with 3GB of RAM and 32GB of Storage that can be expandable via SD card.
Why We Need Stock Firmware?
- to downgrade a device
- to upgrade a device
- Remove FRP, Pattern and Pin lock
- to fix bootloop and software issue
- completely Re-Installation of board software
Pre-Requirement’s
- first Make a complete backup of Your device
- charge the device to prevent accidental shut down during the process
Firmware Information: |
|
|---|---|
| Device Name | Motorola XT2229-2 |
| ROM Type | Full ROM |
| SoC | Mediatek MT6765 |
| OS | Android 12 |
| Password | Null |
| Gapps | Not Included |
| Root Access | No |
| Region | India, Euro, EEA, JP |
| Firmware Version | hawaiipl_RETAIL_STB32.36-86 |
Download Links:
- Retail Asia STB32.36-95: Download
- Retail Euro STB32.36-86: Download
- Retail INDIA STB32.36-87 : Download
Flash Tools & driver:
- VCOM Driver: Download
- SP Flash tool V5.2 Download
- Auto Fastboot Flasher (optional): Download
- ROM2box (both SP Flash tool & disable auth option): Download
How to Install Stock Firmware on Motorola XT2229-2:
- Download & Extract firmware on your computer
- Install Mediatek VCOM driver on Your computer
- Download & Extract smartphone flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- Go to Download tab Click Scatter and load scatter file from ROM folder
- Select ‘Download only’
- Click ‘Download’
- connect Your switched off Phone to computer by using usb cable (press Volume up and down key+ Insert usb) (make sure all driver are installed, if no usb VCOM device then you have to do test point)
- flashing Process started. once done, unplug device & switch it ON
Note: if you will face any flashing error first disable auth using this tool and then flash
Read also: