How to Install twrp Recovery Root Teclast A10S

Root twrp Teclast A10S-

twrp Recovery now Released For the Teclast A10S and Finally We have A Solution to Root it. So that today we will talk about this topic. In the topic We are going to Share a Complete Guide to Root Teclast A10S by using the SuperSU and twrp Recovery.

Many peoples use Teclast A10S but few people know about rooting the phone . So the article For that Whom does Not Know How to Root. Root is Not Necessary for all Peoples but it Require to achieve Some advance features of the Device .

by Rooting the Phone You can improve Your phone’s performance even better. but it also Dangerous for  Newby. You can get the full information about ” Android root ” from Here. We can root our phone in two ways First one using the Computer and other one Without using the Computer. but The Teclast A10S is Not Rootable without a Computer So You Must have a PC to Root it. Let’s get Start The process.

Note-

1. This Guide is Work only on Listed Device. So please Don’t try it on any other Phone.
2. Flashing The ROM Will Erase all your Data, So Must create a backup of your Personal data before Flashing,
3. Please Do carefully, We are not Responsible for any damage, bootloop, or dead SD card’s.
4. Ensure that your Device at-least 50% charge During Flashing Process,to Stop the Accidentally Shut Down.
5. Follow all steps correctly otherwise it Will cause bootloop.

Read also:

• How to Install Stock Firmware Teclast A10S

Features of TWRP Recovery:

• You can flash Custom ROM on
• You can flash modding zip files to customize your phone
• Easy to flash and use Xposed Modules using TWRP
• Easy to Root and Unroot using TWRP Recovery flashable zip SuperSU
• You can install Magisk on
• You can always take FULL NANDROID Backup in case of any modding or flashing.
• Easy access to restore the Nandroid Backup.
• You can flash the image file using TWRP Recovery
• Easy to remove all bloatware using TWRP Recovery
• To underclock and overclock.
• You can clean Wipe, Cache, and Data.

Must Require:

1. backup NVRAM
2. backup Your Personal data
3. Create a nandroid backup

Download-

Pre-Requirement’s:

1. unlocked bootloader [use below Guide]
2. PC and usb
3. adb tools Setup, Download and extract in a folder.
4. Move recovery File to adb folder [must rename it [recovery.img]
5. Install adb fastboot Driver
6. enable usb debugging and oem unlock

How to Install twrp Recovery on Teclast A10S-

Step 1. Download twrp Recovery From above and extract in adb Folder [also Download and  extract From above]

Step 2. Download & Install adb fastboot Driver On Your PC

Step 3. then follow Bellow Instructions,

Step 4. Go to Setting>about Phone>type 7 time Build number > Back>Developer Option and Enable Device Debugging and Oem Unlock.

Step 5. Now Install Correct adb and fastboot Driver on Your PC[Skip if Installed], Go to adb folder[Extracted in above step] Connect Device to PC using usb open CMD Here and type command .

adb reboot bootloader

Step 6. Your Device Booted in Fastboot Mod To check Device connectivity type

fastboot devices

Step 7. Unlock bootloader:

fastboot oem unlock

fastboot flashing unlock

Step 8. Rename twrp to recovery.img and Move it in adb Folder(if Done skip it),

Flash twrp on Teclast A10S using below Code:

fastboot flash recovery recovery.img

Reboot Teclast A10S to twrp using This Code:

fastboot boot recovery.img

Step 9. Recovery is Now Flashed [installed] Your Phone also booted in twrp Make a System Reboot. or Flash zip if you Want.
Step 10. Done

Related articles-