Download & Install 11.0.0.183 Firmware on Huawei TAH-N29M

Download 11.0.0.183 Firmware for Huawei TAH-N29M:

11.0.0.183 Firmware Now available for the Huawei TAH-N29M and You can download it from below. this is a full service Firmware and You can Install it without Rooting the Phone. with the help of this firmware you can solve all software Issues on your  such as hang on Huawei TAH-N29M Logo, frp lock, Fastboot Mode, display Blank or White after Flash etc.

Huawei TAH-N29M Run on Android 10 & it is Powered by KIRIN 990 Processor. connectivity features Include hotspot, bluetooth, screen cast, WIFI & GPS. The device come with 8GB of RAM and 512GB of storage that can be expandable via SD card

Note:

  • Make a backup before Process
  • Charge the device to Prevent accidental shut down

Download Links:

  • HUAWEI_MATE_XS_HW_EU_TAH-N29M 11.0.0.183(C432E2R2P1)_FIRMWARE_EMUI11.0.0_05016PTF: Download
  • Full service firmware for FRP & update (downgrade at own Risk we don’t know it work on not with current Installed firmware with in your device)

How to Install 11.0.0.183 Firmware update on Huawei TAH-N29M:

  • Open the Zip and Extract the dload folder on the Pen drive
  • turn off the Phone
  • connect the Pen-drive to Phone with the OTG cable
  • Press Volume + Volume – & Power button at same time
  • The device itself start Installation Processor, once done it will be rebooted

Note: SD card Method: Extract Zip in Phone Storage/SD card and then same Process

Optional Method:

  • Enter the Service menu by dialing * # * # 2846579 # * # *
  • Press Option 4. Software Upgrade
  • Press OPTION 1. Memory Card Upgrade

Extracted Firmware Look Like below Image


LEAVE A REPLY

Please enter your comment!
Please enter your name here

6 + ten =