How to Flash Xiaomi Devices

Flashing Guide for Xiaomi Phone:

Require tools and Files-

File NameDownload
MI Flash toolsDownload
QD Loader Driver [Must Require]Download
Firmware XiaomiDownload
official RecoveryDownload
Some other useful articles-

1, How to Flash Official Firmware on Vivo With QCOM-DLoader.
2. How to Disbale Boot verification using No verity Disbaler.
3. How to Repair IMEI Number on Qualcomm Phone [Easy Method]
4. How to Install Xposed framework on any Android Device [also Nougat]
5. How to Root without PC [Easy method]
6. How to backup NVRAM aka IMEI Number [Easy method Mediatek]

Note-

1. This Guide is work only on Listed Phone Please Don’t try it on any other phone.
2. Flashing The Rom Will Erase all your Data with official Rom, So create a backup of your personal data before Flashing, if possible.
3. Please Do carefully, We are not Responsible for any damage, bootloop, or dead SD card’s.
4. Ensure that your Device at-least 50% charge During Flashing Process,to Stop the Accidentally Switch off.
5. Follow all steps correctly otherwise it cause bootloop.
6. Must backup NVRAM using this Guide before Doing anything.

Steps-

Step 1. Download everything From above and Save Inside a Folder, [save on Desktop For better navigation’s.

Step 2. Download and Install MI flash tools From above.[Net framework also require if Not Installed in your PC.[ you can Check it by Running the MI flash.]

Step 3. Extract fastboot ROM inside a Folder. Extract on Desktop For better Navigations.

Step 4. on phone enable Device Debugging[Skip if Device is not bootable] and Connect into PC via xiaomi Deep Flash cable Make Sure phone is not in Charging mod,[ if the Device is Not hard Bricked then use Normal Cable, after that reboot your Device to fastboot mod and then type below code [then code work only with our fastboot to edl tools] to Reboot into EDL or if you have latest MI flash then Skip because it work with Fastboot-

fastboot.exe” reboot-edl

Step 5. In Latest Devices EDL Not Come So use fastboot inside edl. Press Power and volume button in Switch off mod or use below code over adb.

adb reboot bootloader

Step 6. then Run MI flash tool{which is Install in above step}

Step 7. Locate Global stable rom extracted Folder.

Step 8. and then click on Refresh a new port is appear and 9008 mode is now Enabled For Flashing

Step 9. So click on flash and wait some time while flashing is complete

Step 10. after Completed your Phone switched on Automatically IF not then Disconnect Usb and Power on manually

Step 11. Done, Stock Rom is Flashed and your Hard bricked Xiaomi Device IS repaired.

How to flash Recovery ROM:

Follow this Step by Step Guide to Flash Recovery ROM Here

LEAVE A REPLY

Please enter your comment!
Please enter your name here

7 − four =