How to Install Stock Firmware EVERCOSS M40A

Download official Firmware/Flash File EVERCOSS M40A-

Download Official Stock Firmware Flash File For EVERCOSS M40A. If you have EVERCOSS M40A Smartphone and You want to download the Stock ROM /Flash File/For it then You are on a Correct Place, You have to do this by following the Below Guide.

The EVERCOSS M40A is a Smartphone which is Run on android OS and Powered by a SPD Processor, the EVERCOSS M40A is a Dual sim Smartphone that accept 2 Regular SIM card, connectivity Option’s include 3G  4G, GPS, Wi Fi, Bluetooth etc, Sensor include Goryo proximity Gravity etc.

When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware anytime. Also if you feel your EVERCOSS M40A lag or has an issue, then flash the stock firmware from the list below and save from situation. Stock Firmware doesn’t void a warranty on your EVERCOSS M40A.

Note-

1. This Guide is work on Listed Devices only. So Please Don’t try on any other phone.
2. Flashing The ROM by Flash tools Will Erase all your Data. So create a backup of your Personal data before Flashing.
3. Please Do carefully, We are not Responsible for any damage, bootloop, or dead SD card’s.
4. Ensure that your Device atleast 50% charge During Flashing Process,to Stop the Accidentally Switch off.
5. Follow all steps correctly otherwise it cause bootloop.
6. Must backup NVRAM using this Guide before Doing anything.

Must Require:

1. backup NVRAM
2. backup Your Personal data
3. Create a nandroid backup

Firmware Information-

Download:

Firmware: EVERCOSS_M40A_V01_8.1_13072018

Product Name: EVERCOSS M40A
Type: Full ROM
ROM Size: 600MB
SoC: Spreadtrum
Product version: EVERCOSS_M40A_V01_8.1_13072018
Os: Android 8.1 oreo
Password: romprovider.com
Download: Mediafire

Flash Tools:

• SPD flash tools R19 Here

Driver:

• Driver Here

How to Install Stock ROM on EVERCOSS M40A-

Follow This Step by Step guide to Install Official Firmware on This Device: Here