How to Flash Spreadtrum Phone

Flashing Spreadtrum Phone-

if you own a SPD based Phone and want to flash it then this Guide is created for you. in this article you will Learn how you can Flash your Spreadtrum Phone with in easy Steps. this guide is Written in very easy readable Steps so you can Easily do it. Spreadtrum is a major processor of Low budget phone So We need this guide to Flash the Device. let’s get Start.

Note-


1. This is a unique guide which is work on almost all SPD Devices,so follow this one for any SPD Device flashing.
2. Flashing The Rom by flash tools will erase all your Data with official Rom, So create a backup of your personal data before Flashing, if possible.
3. Please Do carefully, We are not Responsible for any damage, bootloop, or dead SD card’s.
4. Ensure that your Device atleast 50% charge During Flashing Process,to Stop the Accidentally Switch off.
5.Follow all steps correctly otherwise it cause bootloop.
6. Must backup NVRAM using this Guide before Doing anything.

Downloads-

1. Flash tools
2. official ROM

Flashing Steps-

Step 1. Download Spreadtrum Flash tools from above and extract inside a Folder.

Step 2. Download official Firmware for Your phone from above Link and extract inside a folder.

Step 3. install correct Spreadtrum Driver on your PC.

Step 4. Run Flash tool.exe file from tool folder and load pac File under firmware.

Step 5. Click Flash/ Download as soon as connect your Switched off Phone.

Step 6. Wait for Success Done. You have successfully Flashed your Phone.

Related articles-


1, How to Flash Official Firmware on Vivo With QCOM-DLoader.
2. How to Disbale Boot verification using No verity Disbaler.
3. How to Repair IMEI Number on Qualcomm Phone [Easy Method]
4. How to Install Xposed framework on any Android Device [also Nougat]
5. How to Root without PC [Easy method]
6. How to backup NVRAM aka IMEI Number [Easy method Mediatek]