Download Stock Firmware/Flash File PD2078F Vivo Y73:
Official Stock Firmware Flash File Now available for the PD2078F Vivo Y73 & You can download it from below. by using this firmware you can solve all software Issues on your PD2078F Vivo Y73 such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.
Vivo Y73 Run on Android 11 and it is Powered by Mediatek helio G95 Processor. it is a dual SIM smartphone support Nano SIM card, connectivity features Include hotspot, GPS, WIFI, bluetooth 3G & 4G. The device come with 8GB of RAM and 128GB of storage that can be expandable via SD card.
Note:
- flash at own risk
Why We Need Stock Firmware?
- to downgrade a device
- to upgrade a device
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on a device
- completely Re-Installation of Board Software
Safety Require:
Firmware Information:
Device Name: Vivo Y73
Type: Full ROM+ OTA’s
ROM Size: up to 3-4GB
SoC: Mediatek helio G95
Os: Android 11
Password: Null
Gapps: unknown
Root access: Not
Firmware version: PD2078F_EX_A_1.72.0
Download Links:
Flash Tools:
usb Driver:
- MTK Driver: Here
How to Install Stock Firmware on Vivo Y73:
- unpack downloaded Firmware using 7zip
- Now You have scatter firmware
- Install Mediatek Vcom driver on Your computer
- disable SLA Authentication by following this Guide (if not disabled You will face a BROM error or flash tool Require a Authorized account/ID)
- Download & Extract smartphone flash tools on your computer
- from the flash tool folder Run flash_tool.exe
- set connection like below image (option/connection)
- Go to Download tab Click Scatter and Load Scatter File from ROM folder
- Repeat Process and load DA and Auth file too
- from drop down Select ‘Download only‘
- Click ‘Download’
- turn Phone OFF, Now together Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key (or you have to do test Point)
- You will see a Yellow flashing bar with flashing Process. once done, unplug device and switch it ON
Method 2 (No Auth):
- Install MTK & usbdk driver on your pc
- Run rom2box Go to Mediatek/firmware flasher & open dedicated GUI
- connect phone in BROM Mod (you have to do test Point)
- once Phone detected in tool go to partition manager and locate all Partition file one by one from ROM folder
- once Ready, Click ‘write partition‘
- once done, disconnect device, reconnect once charging started disconnect & Power ON
Read also: