Doogee S95 Pro Firmware Flash File MT6779 10.0

Download Stock Firmware Flash File for Doogee S95 Pro:

Official Stock Firmware/ Flash File Now available for the Doogee S95 Pro & You can download it from below. by using this firmware you can solve all software Issues with in your Doogee S95 Pro such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.

Doogee S95 Pro Run on Android 9.0 and it is Powered by Mediatek MT6779 Processor. it is a dual SIM Smartphone support Nano SIM card, connectivity features Include hotspot, GPS, WIFI & bluetooth. The device come with 8GB of RAM & 128GB of storage that can be expandable via SD card.

Must Require:

Why We Need Stock Firmware?

  • to downgrade a device
  • to upgrade a device
  • Fix some serious issue in device
  • Remove FRP, Pattern and Pin lock
  • fix bootloop and software issue on a device
  • completely Re-Installation of board software

Pre-Requirement’s

  • backup NVRAM using this guide
  • first make a complete backup of your Personal data (if Possible)
  • charge the device at least 50% to prevent accidental shut down during the process

Firmware Information:

Device Name: Doogee S95 Pro
Type: Full ROM
Size: up to 1.3GB
SoC: Mediatek
Os: Android 10
Password: Null
Gapps: Included
Root access: Not
Firmware Version:
DOOGEE-S95Pro-Android10.0_20210513_2021-5-15 s900a_dg_m10_a1_256G8G_128G8G_mt6779_fhdp_bom2_bom9_Q0_cts_EU_LR

Download Links:

How to Install Stock Firmware on Doogee S95 Pro:

  • Extract Downloaded firmware.
  • Install Mediatek VCOM driver on Your computer.
  • Download & extract smartphone Flash tools on your computer
  • from the flash tool folder Run flash_tool.exe

  • Go to Download tab Click Scatter and load scatter file from ROM folder

  • select Download only. Click Download & connect Your switched off Phone to computer by Pressing volume up & down key (in switch off Mod)

  • flashing Process started. once done, unplug device & switch it ON

Note: if there is no USB device then you have to check for USB driver or try test Point

Read also:

have any issue, Let me know via comment