Cubot KingKong Star Firmware Flash File (Stock ROM)

The term “Stock ROM” or “Firmware” describes the version of the operating system that the device’s creator pre-installs. It is the original firmware that comes with a device and can be used to return it to its default settings.

Cubot KingKong Star Stock Firmware is useful for fixing issues such as hang on Logo, frp lock, fastboot Mode, display Blank or white after flash, dead recovery, dead after flash etc. Stock ROMs are often specific to a particular device and are not interchangeable between different devices.

Note:

  • Make a backup before process
  • all data will be wiped, Including internal storage
Firmware Information:
Device Name Cubot KingKong Star
ROM Type Full ROM
SoC Mediatek
OS Android 13
Password Null
Root Access No
Firmware Version check below List

Download Links:

Flash Tools:

USB Driver:

How to Flash Cubot KingKong Star Via SP Flash tool:

  • unpack downloaded Firmware using 7zip
  • Install Mediatek Vcom driver on Your computer
  • disable SLA Authentication by following this Guide (if not disabled You may face BROM error)
  • Download & Extract smartphone flash tools on your computer
  • from the flash tool folder Run flash_tool.exe

  • set connection like below image (option/connection)

  • Go to Download tab Click Scatter and Load Scatter File from ROM folder
  • Repeat Process and load DA and Auth file too

  • from drop down Select ‘Download only
  • Click ‘Download’

  • turn Phone OFF, Now together Press Volume up + down key & Insert USB, Once Phone detected Immediate Release key (make sure your phone stable in device manager)
  • You will see a Yellow flashing bar with flashing Process. once done, unplug device and switch it ON
Read also: