Download Stock Firmware for Cubot King Kong Mini2:
Official Stock Firmware Flash File Now available for the Cubot King Kong Mini2 & You can download it from below. The firmware come in scatter format which can be flash either with SP Flash tool or Miracle box.
Cubot King Kong Mini2 Run on Android 10 and it is Powered by Mediatek MT6761 Processor. it is a dual SIM smartphone support nano sim card, connectivity options Include, hotspot, WIFI, GPS, Bluetooth & 3G. The device come with 3GB of RAM and 32GB of storage that can be expandable via SD card.
Must Require:
Why We Need Stock Firmware?
- to downgrade a Phone
- to upgrade a Phone
- Fix some serious issue in phone
- Remove FRP, Pattern and Pin lock
- fix bootloop and software issue on Phone
- completely Re-Installation of Board Software
Pre-Requirement’s
- backup NVRAM using this Guide
- First Make a complete backup of Your Personal data (if Possible)
- charge the device at least 50% to prevent accidental shut down during the process
Firmware Information:
Device Name: Cubot King Kong Mini2
Type: Full ROM
Size: up to 1.34GB
SoC: Mediatek MT6761
Os: Android 10
Password: Null
Root access: Not
Gapps: Included
Firmware Version: KINGKONGMINI2_A061C_V07_20201113
Download Links:
| File Name | Version | Downloads |
| VCOM Driver | N/A | Download |
| SP Flash tools | V5.2 | Download |
| Firmware/ Flash File | KINGKONGMINI2_A061C_V07_20201113 | Download |
How to Install Stock Firmware on Cubot King Kong Mini2:
- Extract downloaded stock firmware..
- Install Mediatek Vcom driver on Your computer.
- Download & Extract smartphone Flash tools on your computer
- From the flash tool folder Run Flash_tool.exe
- Go to Download tab Click Scatter and Load Scatter File from ROM Folder
- Select Download only. Click Download & Connect Your switched off Phone.
- You can see Flashing Process On Screen. after Complete unplug & Switch it On
Read also:
have any issue, Let me know via comment