How to Install Stock Firmware on Bq Mobile bq-5015L First

Download official Firmware/Flash File Bq Mobile bq-5015L First:

Download Official Stock Firmware Flash File For Bq Mobile bq-5015L First. If you own Bq Mobile bq-5015L First Smartphone and You want to download the Stock ROM /Flash File/For it then You are on a Correct Place, You have to do this by following the Below Guide.

The Bq Mobile bq-5015L First Run on android 8.1 oreo OS & it is Powered by  Spreadtrum Processor. it is a Dual SIM Smartphone Support Nano GSM SIM Card, Connectivity Option’s Include 3G GPS, Wi Fi, Bluetooth etc. Sensor Include Goryo Proximity Gravity etc.

The Device Come With 1GB of RAM and 8GB of Storage Can be expandable via SD card. In camera Department it Come With 5MP Rear Camera With 2MP Front Shooter.


1. Flashing the ROM Will Erase all Your Personal Data including Storage. So we advice You to First take a Complete backup of your Phone.
2. Please Do carefully, We are Not Responsible for any Damage to Your Device.
3. Must backup NVRAM using this Guide before Doing anything.
4. Ensure that Your Device at-least 50% Charge During Flashing Process to Prevent accidental Shut Down.

Must Require:

1. backup NVRAM
2. backup Your Personal data
3. Create a nandroid backup

Firmware Information-

Product Name: Bq Mobile bq-5015L First
Type: Full ROM
ROM Size:
 up to 2GB
SoC: SC9832E
Os: Android 8.1
Password: null
Gapps: Included
Root access: Not
Version: BQru_5015L_V05_20181117

Download :

Flash Tools:
  • SPD flash tools R19 Here

How to Install Stock Firmware on Bq Mobile bq-5015L First:

    1. Download and Install SPD Driver From above
    2. Download and Extract ROM File and Flash tools From above
    3. Run Flash tools and Click Load Package.
    4. Now Select Pac file from the Downloaded ROM folder
    5. Click Download and Connect Your Switched off Phone.
    6. Done/

have any issue Here is a Detailed Guide with Images: Here

Check other articles-