Boot Redmi K20/MI 9T to Recovery and Fastboot & EDL Mod:
Step by Step Guide to Boot Redmi K20/MI 9T Smartphone to Recovery,fastboot & EDL Mod, if you own a Redmi K20/MI 9T Smartphone and Want to boot it in Recovery Fastboot & EDL Mod then You Can Do it by Follwoing the Below Instructions.
The Redmi K20 Run on android 9.0 OS and Powered by a QCOM SD 710 Processor. it is a Dual SIM Smartphone that accept 2 Regular SIM Card, connectivity Option’s include 3G 4G, GPS, Wi Fi, Bluetooth etc, Sensor include Goryo Proximity Gravity etc.
Redmi K20 Come with 6GB of RAM and 128GB Storage Can be Expandable via SD Card. in Camera Department the Device Come with 48MP Primary Camera With 8MP telephoto & 13MP ultra Wide angle Sensor. on the Front it has 20MP Shooter.
Reboot Redmi K20/MI 9T to Recovery Mod:
Steps:
- Switch Off Phone.
- Once off together Press the Power and volume up button.
- once the Device Logo appear Release the Button.
- After This Simply Wait for the time till Your device boots into the Recovery Mode.
Reboot to Recovery using adb.
- Enable Usb debugging
- Connect Phone to PC with usb
- open CMD on Platform tool Folder
- type this code and hit enter:
adb reboot recovery
How to Boot Redmi K20/MI 9T to Fastboot Mod:
Steps:
- Switch Off Phone.
- Once off, together Press the Power and Volume down button.
- This Will turn the Device on and You need to hold both the buttons till the Device logo Disappears.
- After this, Simply Wait for the time till your device boots into the Fastboot Mode.
Reboot to bootloader using adb.
- Enable usb debugging
- Connect Phone to PC with usb
- open cmd on adb folder
- type This code and hit enter:
adb reboot bootloader
How to Boot Redmi K20/MI 9T to EDL Mod:
Method 1:
- enable usb Debugging
- Connect phone to PC
- Send The command Via adb
adb reboot edl
Method 2:
- Install QD Loader Driver on PC
- Remove back Cover of Phone
- Find out The Pinout as Show In Image
- Connect Phone to PC with usb Cable
- take a Coper Wire and Short that Pinout
Pinout Coming Soon
Method 2: