How to Root BLU Pure View With Magisk

Root twrp BLU Pure View

Working Root Method for the BLU Pure View is Now available. and You Will find it in this article So keep up Your eyes on the article from the top to bottom. Many peoples use BLU Pure View but few people know about rooting the phone . So the article For that Whom does Not Know How to Root. Root is Not Necessary for all Peoples but it Require to achieve Some advance features of the Device .

by Rooting the Phone You can improve Your phone’s performance even better. but it also Dangerous for  Newby. You can get the full information about ” Android root ” from Here. We can root our phone in two ways First one using the Computer and other one Without using the Computer. The BLU Pure View is Rootable With & Without a Computer just Follow below Instructions.

Note-

1. This Guide is work Only on Listed Phone So Please Don’t try it on any other Phone.
2. Flashing The ROM Will Erase all your Data So Create a backup of your personal data before Flashing Here
3. Please Do carefully, We are not Responsible for any damage, bootloop, or dead SD card’s.
4. Ensure that your Device at-least 50% charge During Flashing Process,to Stop the Accidentally Switch off.
5.Follow all steps correctly otherwise it cause bootloop.
6. Must backup NVRAM using this Guide before Doing anything.

Must Require:

1. backup NVRAM
2. backup Your Personal data
3. Create a nandroid backup

Require tools and Files-


File Name Download
Flash tools Download
adb Folder Download
adb fastboot Driver Download
Magisk Manager Download
twrp below

How to Install twrp Recovery on BLU Pure View-


Not available For This Device. You can try This Recovery From Life one X3 Which has Same Similar Speces. You Need OTG to operate it OR You can Report it for Pure View With Drag and Drop Method twrp MT6753 7.0 [Life one X3] Here

twrp Will be added to the article when it available and You Will be notified via Mail or Comment if Subscribed.

Look Guys i am Giving You Some ideas about The Root this Guide 100% Working but Require Some additional Knowledge about Android Root if You Don’t have Please Don’t try it. or Do at own Risk.

How to Root BLU Pure View:


Step 1 First of all we Need Stock boot  File so take it from Stock ROM or Follow this Guide to backup unRooted Stock ROM Here

OR

Here is official Firmware First Flash it then take boot.img File [Download Firmware For BLU Pure View ]

Step 2. Now Flash Downloaded official Firmware using the Listed Guide on Firmware Page.or Skip if You have Dumped Firmware.

Step 3. after that fully bootup your Phone. then transfer Magisk Manager.apk File to Your Phone and Install it.

Step 4. then transfer boot.img file from Firmware folder to phone.

Step 5. turn Data Connection on and Run Magisk Manager.

Step 6. Wait Some time When it Say update Magisk/Install Magisk. then Click Patch boot.img File

Step 7. Then Point Stock boot.img File in Magisk [transfer to Phone in earlier step]

Step 8. Wait While Magisk Patch it. Done Patched_boot.img Placed in ‘Magisk’ folder of Phone’S Storage. transfer this file to Your PC.

Step 9. Now We have 2 Way to Flash it First via flash tools and Second Via fastboot..

Step 10. Via fastboot:

  1. Move the patched boot.img file to the adb Folder.
  2. Enable usb debugging and oem unlock from the Developer Options
  3. Connect Phone to PC with usb . Open CMD in adb Folder and type below code
  4. adb reboot bootloader
  5. fastboot oem unlock [if not Work use below one]
  6. fastboot flashing unlock
  7. fastboot format userdata
  8. fastboot flash boot Patched_boot.img
  9. fastboot reboot

Step 11. Done.Wait until Device bootup  again Install & open Magisk Manager You can See everything in Green. Enjoy.. Your Phone Now RootedWith Magisk..

Note: On Mediatek Phone You can also use SP Flash tools to Flash Patched boot.img

Follow Video Guide- Here

Note-
  1. If you are unable to Done using above Guide then Follow this “Without PC Guide Here