The term Official Firmware describes the version of the operating system that the device’s manufacture pre-installs. It is the original firmware that comes with a device and can be used to return it to its default settings.
Alldocube iPlay 60 Lite T1103TL Stock firmware is useful for fixing issues such as hang on Logo, frp lock, fastboot Mode, display Black or white after flash, dead recovery, dead after flash etc. Stock ROMs are often specific to a particular device and are not interchangeable between different devices.
Pre-Requirement’s
- Make a backup before process
- charge the device at least 50% to prevent accidental shut down during the process
Disclaimer:
- flash at own risk
Firmware Information: |
|
|---|---|
| Device Name: | Alldocube iPlay 60 Lite T1103TL |
| ROM Type: | Full ROM |
| SoC: | unisoc |
| OS: | Android 13xx |
| Password: | Null |
| Root Access: | No |
| Firmware Version: | check below list |
Download Links
- SPD tools R27: Download
- ROM2box Full Free: Download
- SPD Driver R4.20.0201: Download
- Contact Me for Auth, unbrick, FRP, Reset, Region Change & root (paid)
Available Firmware
How to Install Stock Firmware on Alldocube iPlay 60 Lite T1103TL
- Download and Install SPD Driver on your computer
- Download and Extract Firmware File and Flash tools
- Run SPD Flash tool
- Click load Package & Select Pac file from the downloaded ROM folder
- Click Download/Start Arrow
- Connect Your switched off Phone by pressing volume up & down key
- Wait until success
- once done, disconnect device & switch it ON
Install using Fastboot:
Make sure bootloader is unlocked
- extract payload.bin and send every partition like this
fastboot flash 'partition name' 'filename'
replace partition name and filename with exact partition and file
Install using Stock Recovery:
adb sideload filename
Check other articles: