UMIDIGI G3 Tab Ultra Firmware MT6789 13.0

Download official stock firmware flash file for the UMIDIGI G3 Tab Ultra. If you own a UMIDIGI G3 Tab Ultra smartphone and want to download the stock ROM/flash file for it, then you are in the right place. follow the guide below to proceed.

The UMIDIGI G3 Tab Ultra runs on Android 13 OS, powered by a Mediatek MT6789 processor. Connectivity options include GPS, Wi-Fi, Bluetooth, etc. Sensors include gyroscope, proximity, gravity, etc.

Firmware Information:
Device Name UMIDIGI G3 Tab Ultra
ROM Type Full ROM
SoC Mediatek MT6789
Operating System Android 13xx

Download Links

Flash Tools

USB Driver

Note:

  • Make a backup before process
  • it will erase all your data Including Internal storage

How to Install Stock ROM On UMIDIGI G3 Tab Ultra

  1. Unpack Firmware: after Downloading the firmware from above links extract the zip file using 7z.
  2. Install Mediatek VCOM Driver: Install Mediatek driver on your computer which make a communication between your system and the device you are flashing.
  3. Disable SLA Authentication : next you have to disable serial link authentication in order to fix any type of flashing error, you can do it by following this guide
  4. Run Flash tool: Enter the flash tool folder and run the SPFlashToolV6.exe.
  5. Select Scatter File: In the Download tab, click ‘choose’ in front of scatter-loading file & in the Popup windows select scatter file from ROM folder (you have to use latest version of SP Flash tool for XML Support)
  6. Select Auth File: repeat the same process and select Auth File from ROM File
  7. Download Mode Selection: from the dropdown menu, select ‘Download Only’ option which prevent flash tool to wipe any nvitems.
  8. Initiate Download: Now final Step, Click  ‘Download‘ button to start the flashing process
  9. Connect Device: I am assuming that the device already connected, as we connect it during the SLA Disable Process. if the device not connected, hold volume up down button and connect it (make sure it’s in power off mod)
  10. Flashing Progress: once the flashing process started, monitor the yellow flashing process by watching it, Once flashing done, disconnect device, it will start automatically
  11. Setup Device: once the device start successfully setup it by following the screen instructions.
Read also: