unbrick is a process to repair a device that was tablet such as a tablet or smartphone with in Tecno Pova 5 LH7n user face two type of brick- soft brick and hard brick.
Soft brick: in this stage device stuck or freez on boot logo or animation due to any software/ firmware issue.
hard brick: in this stage device completely goes dead and does not show any sign of boot for example logo or animation, even fastboot or recovery mod. it show only USB COM driver /device when we connect it to computer
If you’re experiencing a brick problem on your Tecno Pova 5 LH7n, either soft or hard brick, you can resolve it by following the instructions below.
Fix Soft brick/ Bootloop (Fastboot)
- Download Stock ROM: download latest firmware for your device from below links, the firmware must be full OTA (payload.bin) or Fastboot ROM
- Install USB Driver: To enable a communication between your device and computer, you must first install the fastboot drivers on your computer, which you may do by following this page.
- Flash Stock ROM: You can flash stock ROM on your device using the fastboot enhance tool if the downloaded file is payload
* Plug phone in bootloader Mod
* Run fastoot enhance tool
* select reboot fastbootd
* then select flash payload.bin
* wait until success.
if it’s a fastboot ROM, you can flash it using fastboot mod using this format
fastboot flash partition-name filename-name fastboot -w fastboot reboot
- Wipe data and cache: After flashing the Stock ROM, it’s a good idea to wipe the data and cache partitions to ensure that your device runs smoothly.
- Reboot your device: Finally, reboot your device and set it up with your Google account.
Fix hard brick (BROM/Preloader)
- the device run on helio G99 source which is not supported in MTKClient, SP Flash tool also require auth (custom DA) so you have to contact us for Auth Flash >>
Requirement’s: