How to unbrick Nothing Phone 1

unbrick is a process to repair a device that was bricked, with in Nothing Phone 1 user face two type of brick- soft brick and hard brick.

Soft brick: in this stage device stuck or freez on boot logo or animation due to any software/ firmware issue.

hard brick: in this stage device completely goes dead and does not show any sign of boot for example logo or animation, even fastboot or recovery mod. it show only 9008 USB COM driver /device when we connect it to computer

so if your Nothing Phone 1 having any of soft or hard brick issue then you can fix it by following the below Instructions.

Requirement’s

Steps to unbrick Nothing Phone 1:

Soft brick:

  • Download Latest update firmware
  • Extract Downloaded Firmware following this guide
  • extract platform tools to extract firmware folder
  • Open CMD in firmware folder
  • now send Below code
fastboot –set-active=a
fastboot format:ext4 userdata
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash odm odm.img
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img

fastboot reboot bootloader

fastboot –set-active=b
fastboot format:ext4 userdata
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash odm odm.img
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img

or you can use single code for both A and B slot like this

fastboot flash partition-name_ab 'finemame'
  • one done reboot phone to recovery wipe userdata and reboot
  • success..

for full firmware flash use this batch script

hard brick:

  • Firehose not available

have any question Let Me know Via comment.