Teracube 2e 2020 Firmware Flash File (Stock ROM)

Download official Firmware (Stock ROM) for Teracube 2e 2020:

Official Stock Firmware Now available for the Teracube 2e 2020 & You can download it from below. by using this firmware you can solve all software Issues with in your Teracube 2e 2020 such as hang logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc. Teracube 2e 2020 Run on Android 10 and it is Powered by Mediatek Processor. it is a dual SIM smartphone support nano SIM card, connectivity features Include hotspot, GPS, WIFI & bluetooth.

Pre-Requirement’s

  • backup NVRAM using this guide
  • make a complete backup of your device
  • charge the device at least 50% to prevent accidental shut down during the process

Note:

  • (optional) disable auth by following this Guide
  • The firmware is for Repairing purpose only, You have to manage risk accordingly

Firmware Information:

Device Name: Teracube 2e 2020
Type: Full ROM
Size: up to 1-2GB
SoC: Mediatek
Os: Android 10
Password: Null
Gapps: Included
Root access: Not
Firmware Version: Teracube_2e_06_2020

Download Links:

How to Install Stock Firmware on Teracube 2e 2020:

  • Download & Extract firmware on your computer
  • Install Mediatek VCOM driver on Your computer
  • Download & Extract smartphone flash tools on your computer
  • from the flash tool folder Run flash_tool.exe

  • Go to Download tab Click Scatter and load scatter file from ROM folder

  • select Download only.
  • Click Download
  • connect Your switched off Phone to computer by using usb cable (USB +Volume up and down key) (make sure all driver are installed, if no usb VCOM device then you have to do test point)

  • flashing Process started. once done, unplug device & switch it ON
Read also:

have any issue, Let me know via comment