Vivo Y12A PD2139JF Firmware Flash File

Vivo Y12A PD2139JF Flash File Free Download:

official Stock Firmware Now available for the Vivo Y12A PD2139JF & You can Download it from below. by using this firmware you can solve all software Issues on your Vivo Y12A PD2139JF such as hang on Logo, frp lock, fastboot Mode, display blank or white after flash, dead recovery, dead after flash etc.

Vivo Y12A PD2139JF Run on Android 11 & it is Powered by Mediatek Processor. it is a dual sim smartphone support Nano-SIM cards. connectivity options Include Wi-Fi GPS bluetooth NFC, USB OTG, FM, 3G & 4G. the device come with 3GB of RAM and 32GB of storage that can be expandable via SD card.

Pre-Requirement’s

  • backup NVRAM using this guide
  • make a complete backup of your device
  • charge the device at least 50% to prevent accidental shut down during the process

Note:

  • disable auth by following this Guide Win / Linux (optional if any error)
  • The firmware is for Repairing purpose only, You have to manage risk accordingly
  • downgrade via flash tools work’s on Most of devices but I don’t know about this device
  • a customized MTK DA file is Require to bypass ‘Download agent Authentication‘ you can

Firmware Information:

Device Name: Vivo Y12A
Type: Full ROM
ROM Size: up to 3-6GB
SoC: MTK
Os: Android 11
Password: Null
Gapps: Included
Root access: Not
Firmware Version:
PD2139JF_EX_A_11.0.2.3.W30.V000L1_vivo_mtk_alps-release-r0.mp1-pre4.1

Download Links:

EDL Firmware:
full firmware to Reinstall board software (only for dead and bootloop devices)

How to Install Stock Firmware on Vivo Y12A PD2139JF:

  • Download & Extract firmware on your computer
  • Install Mediatek VCOM driver on Your computer
  • disable SLA auth by following this Guide Win / Linux
  • Download & Extract smartphone flash tools on your computer
  • from the flash tool folder Run flash_tool.exe

  • Go to Download tab Click Scatter and load scatter file from ROM folder
  • Repeat Process and load DA & Auth file too

  • on SP flash tool Setup Connection Like below Images
  • Click Options > Options > connection and make the settings as in the screenshot (UART connection mode)

  • select Download only. Click Download
  • connect Your switched off Phone to computer by using usb cable (USB +Volume up and down key) (make sure all driver are installed, if no usb VCOM device then you have to do test point)

  • flashing Process started. once done, unplug device & switch it ON
Read also:

have any issue, Let me know via comment